Slack 1.2.1: a clearer Send tile, and a send target you can see

The line above the message box said "Sending as Apollo Beach → #ops" with a
Lock button beside it. The box's own placeholder already reads "Message
#ops…" and the title bar already has a Lock, so both went. Quick replies
keeps its line: it has no placeholder, so that is the only place its target
is named.

The bigger thing behind it: until a transcript was clicked, a send went to
the first channel in the admin list whether or not that channel was on the
dashboard — so a board showing only #ops would quietly aim at #general. The
target now falls to the first configured channel whose transcript is
actually up, which with a single transcript is that one. Only when the page
shows no transcript at all does it fall back to the first configured
channel.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

CLAUDE.md

@@ -44,7 +44,7 @@ title-bar controls). The rules that matter most:
 - `prodcom-listener/` — live ProdCom transcript web app. Zero-dependency Node
   `server.js` that serves `public/` and proxies `/prodcom/*` (including the SSE
   transcript stream) to the ProdCom API at `config.json → prodcomUrl`
-  (default `http://10.3.11.152:24480`). Good reference for: SSE handling,
+  (set per site; each campus runs its own). Good reference for: SSE handling,
   reconnect logic, channel colors/filtering, PWA install.
 - `band-lineup-display/` — backstage Electron app (stage lineup photos with
   mic/pack labels) plus ProPresenter Now/Next:

README.md

@@ -100,10 +100,24 @@ with this machine's shell settings — the same keys as the checked-in
 | --- | --- |
 | `port` | Port ProdDash serves on (default `24500`). The macOS launcher writes this one, so the port it is set to holds however ProdDash is started. |
 | `adminPasscode` | If set, the admin page asks for this shared passcode. Leave `""` for none — it's a plain-HTTP LAN tool. |
+| `forge` | Where updates and module installs are fetched from. Absent or `"github"` uses GitHub; a Gitea or Forgejo base URL such as `"http://10.3.8.90:3000"` uses a server of your own. Set it per machine in the data directory, alongside `repo`. |
 | `theme` | The dashboard palette: `booth` (default), `harbor`, `graphite`, `ember` or `daylight`. The admin page's **Theme** section writes this one — see [Themes](#themes). |
 
+**Updating from your own git server.** ProdDash fetches one `tar.gz` of the
+branch — nothing else — so any Gitea or Forgejo works. Point `forge` at its
+base URL and `repo` at the owner/repo there:
+
+```json
+{ "forge": "http://10.3.8.90:3000", "repo": "michael/ProdDash", "branch": "main" }
+```
+
+Gitea spells an archive URL differently from GitHub, which is the only thing
+that changes; the tarball itself is identical, commit hash included, so update
+detection and module installs behave exactly as before. Make the repository
+readable without signing in, or ProdDash cannot fetch it.
+
 Environment variables override both files: `PORT`, `PRODDASH_PASSCODE`, and
-`PRODDASH_DATA_DIR` to put the data directory somewhere else (a relative path
+`PRODDASH_FORGE`, and `PRODDASH_DATA_DIR` to put the data directory somewhere else (a relative path
 is taken from the app folder; `PRODDASH_DATA_DIR=config` restores the old
 in-repo location). If the default directory can't be created, the server says
 so and falls back to the app's `config/` folder.
@@ -131,10 +145,11 @@ set on a tile itself (a PCO Plan header colour, say) is deliberately kept.
 
 ## Installing modules and updating
 
-Everything below happens in the **admin page**; ProdDash talks to its GitHub
+Everything below happens in the **admin page**; ProdDash talks to its git
-repository (`michaelmcgary2008/ProdDash`, branch `main` — change with
+repository — `michael/ProdDash` on the church's own Gitea at
-`repo` / `branch` in `proddash.json` or the `PRODDASH_REPO` variable,
+`chronicles-ab.waterschurch.org:3000`, branch `main`. Change it with `forge`,
-`owner/repo#branch`). It downloads one small archive of the branch, at most
+`repo` and `branch` in `proddash.json`, or the `PRODDASH_FORGE` and
+`PRODDASH_REPO` variables (`owner/repo#branch`). It downloads one small archive of the branch, at most
 every few minutes, only while the admin page is open or for the update check
 below. Nothing is installed without someone clicking.
 
@@ -216,7 +231,13 @@ below. Nothing is installed without someone clicking.
   Tile settings: channel icons, direction and timestamps.
 - **ProPresenter** — what's live and what's next, with slide progress,
   driven by the shared `propresenter-core` client (ProPresenter 7/20).
+  The ＋ picker offers two tiles: **Now / Next**, the full card, and **Now**,
+  the live item alone with the gradient filling the tile edge to edge — a
+  wall panel that says one thing.
   Admin config: ProPresenter endpoint (host : port), password.
+  Tile settings: a **Show** group of switches for the playlist name, live
+  status, NOW and NEXT labels, slide count, progress bar, the next list and
+  its item tags, plus tidy titles.
 - **Timers** — live ProPresenter timers (countdown, countdown-to-time,
   elapsed) and LTC timecode as auto-sized cards. The ＋ picker lists every
   discovered timer (and the LTC card) as its own tile, or add "All timers"

SPEC.md

@@ -129,7 +129,7 @@ modules/<id>/
   "minSize": { "w": 2, "h": 2 },
   "defaultSize": { "w": 4, "h": 3 },
   "configSchema": {
-    "prodcomUrl": { "type": "string", "label": "ProdCom URL", "default": "http://10.3.11.152:24480" },
+    "prodcomUrl": { "type": "string", "label": "ProdCom URL", "default": "" },
     "apiKey":     { "type": "password", "label": "API key (if PSK auth enabled)", "default": "" }
   },
   "instanceSchema": {

config/proddash.json

@@ -1,6 +1,7 @@
 {
   "port": 24500,
   "adminPasscode": "",
-  "repo": "michaelmcgary2008/ProdDash",
+  "forge": "http://chronicles-ab.waterschurch.org:3000",
+  "repo": "michael/ProdDash",
   "branch": "main"
 }

modules/prodcom-transcript/module.json

@@ -1,7 +1,7 @@
 {
   "id": "prodcom-transcript",
   "name": "ProdCom",
-  "version": "1.3.0",
+  "version": "1.3.1",
   "proddash": ">=1.1.0",
   "description": "Live ProdCom transcript",
   "permissions": [
@@ -26,9 +26,10 @@
       "type": "endpoint",
       "label": "ProdCom server",
       "default": {
-        "host": "10.3.11.152",
+        "host": "",
         "port": 24480
-      }
+      },
+      "help": "The ProdCom server at THIS location — every campus has its own. Blank until you set it, so a new install never reads another campus's comms."
     },
     "apiKey": {
       "type": "password",

modules/prodcom-transcript/server.js

@@ -269,6 +269,9 @@ module.exports = {
       streams,
       health() {
         if (status.state === 'ok') return { status: 'ok', message: `Live — ${channels.length} channel${channels.length === 1 ? '' : 's'}, ${entries.size} entries` };
+        // Nothing to connect to is a setting that is missing, not a link that
+        // is coming up — it reads red, like the other modules say it.
+        if (!target) return { status: 'error', message: status.message };
         return { status: status.state === 'error' ? 'error' : 'connecting', message: status.message };
       },
     };

modules/propresenter-now-next/client.js

@@ -6,6 +6,12 @@
    in /admin; the tile only renders. */
 
 export default function create({ root, moduleApi }) {
+  /* "now" is the live item on its own, filling the tile; "full" is that plus
+     the rest of the playlist. The picker presets `view`; a tile placed before
+     this module had a picker has neither, and gets the full card. */
+  const view = String(moduleApi.instanceSettings.view || moduleApi.variant || 'full');
+  const nowOnly = view === 'now';
+
   let state = null;
   let feedOffline = false;
   let stream = null;
@@ -33,11 +39,13 @@ export default function create({ root, moduleApi }) {
     </div>`;
 
   const screenEl = root.querySelector('.nn-screen');
+  if (nowOnly) screenEl.classList.add('nn-only-now');
   const topRow = root.querySelector('.nn-top');
   const playlistNameEl = root.querySelector('.nn-playlist');
   const liveEl = root.querySelector('.nn-live');
   const liveTextEl = root.querySelector('.nn-live-text');
   const nowEl = root.querySelector('.nn-now');
+  const nowLabelEl = root.querySelector('.nn-label');
   const nowTitleBox = root.querySelector('.nn-title-box');
   let nowTitleEl = root.querySelector('.nn-title');
   const nowMetaEl = root.querySelector('.nn-meta');
@@ -47,9 +55,11 @@ export default function create({ root, moduleApi }) {
   const nextListEl = root.querySelector('.nn-next-list');
   const nextMoreEl = root.querySelector('.nn-next-more');
 
+  /** A setting, defaulting to on — a Now tile's schema omits the Next ones. */
   function prefs() {
-    return moduleApi.instanceSettings; // showPlaylist / showProgress / cleanTitles
+    return moduleApi.instanceSettings;
   }
+  const on = (key) => prefs()[key] !== false;
 
   /* ── title tidying (same rule as propresenter-core.cleanItemName) ─ */
 
@@ -65,7 +75,7 @@ export default function create({ root, moduleApi }) {
   }
 
   function displayName(raw) {
-    return prefs().cleanTitles ? cleanItemName(raw) : String(raw || '').trim();
+    return on('cleanTitles') ? cleanItemName(raw) : String(raw || '').trim();
   }
 
   function itemTypeTag(type) {
@@ -307,7 +317,9 @@ export default function create({ root, moduleApi }) {
 
     const total = state.currentSlideTotal || activeItem?.slideCount || 0;
     const current = state.currentSlide || 0;
-    if (total > 0 && current > 0) {
+    if (!on('showSlideCount')) {
+      nowMetaEl.textContent = '';
+    } else if (total > 0 && current > 0) {
       const remaining = Math.max(0, total - current);
       nowMetaEl.textContent = `Slide ${current} / ${total} · ${remaining} left`;
     } else if (total > 0) {
@@ -318,7 +330,7 @@ export default function create({ root, moduleApi }) {
       nowMetaEl.textContent = '';
     }
 
-    if (prefs().showProgress && total > 0) {
+    if (on('showProgress') && total > 0) {
       progressEl.hidden = false;
       const pct = current > 0 ? Math.max(0, Math.min(100, (current / total) * 100)) : 0;
       progressFillEl.style.width = `${pct}%`;
@@ -349,6 +361,10 @@ export default function create({ root, moduleApi }) {
       nameEl.textContent = displayName(item.name) || '(untitled)';
       row.appendChild(nameEl);
 
+      if (!on('showTags')) {
+        nextListEl.appendChild(row);
+        continue;
+      }
       if (item.type === 'presentation' && Number.isInteger(item.slideCount)) {
         const chip = document.createElement('div');
         chip.className = 'nn-count-chip';
@@ -366,7 +382,7 @@ export default function create({ root, moduleApi }) {
       nextListEl.appendChild(row);
     }
 
-    nextLabelEl.hidden = upcoming.length === 0;
+    nextLabelEl.hidden = upcoming.length === 0 || !on('showNextLabel');
     nextMoreEl.hidden = true;
     markNextOverflow();
     requestAnimationFrame(markNextOverflow);
@@ -374,12 +390,22 @@ export default function create({ root, moduleApi }) {
 
   function render() {
     screenEl.classList.toggle('is-offline', feedOffline);
-    const showTop = prefs().showPlaylist || feedOffline || !state?.reachable || !state?.enabled;
+    // Trouble always shows, whatever is switched off: a tile that has stopped
-    topRow.classList.toggle('hidden-row', !showTop);
+    // updating must never look like one with nothing live.
-    playlistNameEl.textContent = prefs().showPlaylist ? state?.playlistName || '' : '';
+    const trouble = feedOffline || !state?.reachable || !state?.enabled;
+    const wantPlaylist = on('showPlaylist');
+    const wantLive = on('showLive') || trouble;
+    topRow.classList.toggle('hidden-row', !wantPlaylist && !wantLive);
+    liveEl.hidden = !wantLive;
+    // Hidden, not just emptied: it is flex:1, so an emptied one still holds
+    // the row open and pushes the live dot off the right edge.
+    playlistNameEl.hidden = !wantPlaylist;
+    playlistNameEl.textContent = state?.playlistName || '';
+    nowLabelEl.hidden = !on('showNowLabel');
+    screenEl.classList.toggle('nn-no-next', nowOnly || !on('showNext'));
     renderLive();
     renderNow();
-    renderNext();
+    if (!nowOnly && on('showNext')) renderNext();
   }
 
   /* ── sizing: --unit scales the whole card to the tile ───────────── */
@@ -387,6 +413,10 @@ export default function create({ root, moduleApi }) {
   function applyUnit() {
     const unit = Math.max(6.5, Math.min(20, root.clientHeight * 0.032));
     screenEl.style.setProperty('--unit', unit.toFixed(2) + 'px');
+    // On a Now tile the top row floats over the gradient, so at the shortest
+    // sizes it would sit on the title. Below the height it needs, it goes —
+    // the header dot and the title itself still report trouble.
+    screenEl.classList.toggle('nn-tight', nowOnly && root.clientHeight < unit * 9);
   }
 
   /* ── live feed ──────────────────────────────────────────────────── */

modules/propresenter-now-next/module.json

@@ -1,8 +1,8 @@
 {
   "id": "propresenter-now-next",
   "name": "ProPresenter",
-  "version": "1.0.1",
+  "version": "1.1.0",
-  "proddash": ">=1.1.0",
+  "proddash": ">=1.5.0",
   "description": "What is live in ProPresenter and what comes next",
   "permissions": [
     { "kind": "local-network", "reason": "Reaching ProPresenter on this network" }
@@ -20,13 +20,22 @@
     },
     "password": {
       "type": "password",
-      "label": "API password (only if set in ProPresenter)",
+      "label": "Password",
       "default": ""
     }
   },
   "instanceSchema": {
-    "showPlaylist": { "type": "boolean", "label": "Show the playlist name", "default": true },
+    "cleanTitles": { "type": "switch", "label": "Tidy titles", "default": true },
-    "showProgress": { "type": "boolean", "label": "Show the slide progress bar", "default": true },
+    "showPlaylist": { "type": "switch", "label": "Playlist", "default": true, "group": "Show" },
-    "cleanTitles": { "type": "boolean", "label": "Tidy titles (hide [ Full ] tags and date codes)", "default": true }
+    "showLive": { "type": "switch", "label": "Live status", "default": true, "group": "Show" },
+    "showNowLabel": { "type": "switch", "label": "Now label", "default": true, "group": "Show" },
+    "showSlideCount": { "type": "switch", "label": "Slide count", "default": true, "group": "Show" },
+    "showProgress": { "type": "switch", "label": "Progress bar", "default": true, "group": "Show" },
+    "showNext": { "type": "switch", "label": "Next list", "default": true, "group": "Show" },
+    "showNextLabel": { "type": "switch", "label": "Next label", "default": true, "group": "Show" },
+    "showTags": { "type": "switch", "label": "Item tags", "default": true, "group": "Show" }
+  },
+  "instanceGroups": {
+    "Show": { "collapsed": false, "columns": 2 }
   }
 }

modules/propresenter-now-next/server.js

@@ -108,6 +108,43 @@ module.exports = {
     };
   },
 
+  /**
+   * Two ways to place this module. "Now / Next" is the full card — what is
+   * live, then the rest of the playlist. "Now" is the same live item alone,
+   * edge to edge with the gradient filling the tile: a wall display that says
+   * one thing. The Now entry offers only the settings it can act on, so its
+   * gear carries no Next switches.
+   */
+  tiles() {
+    return [
+      {
+        id: 'full',
+        name: 'Now / Next',
+        description: 'What is live, and the rest of the playlist',
+        defaultSize: { w: 4, h: 5 },
+        minSize: { w: 3, h: 3 },
+        settings: { view: 'full' },
+      },
+      {
+        id: 'now',
+        name: 'Now',
+        description: 'Only what is live, filling the tile',
+        defaultSize: { w: 4, h: 2 },
+        minSize: { w: 2, h: 1 },
+        settings: { view: 'now' },
+        instanceSchema: {
+          cleanTitles: { type: 'switch', label: 'Tidy titles', default: true },
+          showPlaylist: { type: 'switch', label: 'Playlist', default: true, group: 'Show' },
+          showLive: { type: 'switch', label: 'Live status', default: true, group: 'Show' },
+          showNowLabel: { type: 'switch', label: 'Now label', default: true, group: 'Show' },
+          showSlideCount: { type: 'switch', label: 'Slide count', default: true, group: 'Show' },
+          showProgress: { type: 'switch', label: 'Progress bar', default: true, group: 'Show' },
+        },
+        instanceGroups: { Show: { collapsed: false, columns: 2 } },
+      },
+    ];
+  },
+
   routes() {
     return {
       'GET /state': (req, res) => {

modules/propresenter-now-next/style.css

@@ -21,6 +21,51 @@
   justify-content: center;
 }
 
+/* NEXT switched off, or a Now tile: the list goes and the card takes the room. */
+[data-module="propresenter-now-next"] .nn-screen.nn-no-next .nn-next-wrap { display: none; }
+[data-module="propresenter-now-next"] .nn-screen.nn-no-next { justify-content: center; }
+
+/* ── the "Now" tile ──
+   Only what is live, edge to edge: the gradient moves off the card and onto
+   the whole tile, the card loses its border, radius and box, and the title
+   sits in the middle of everything. Nothing is inset, so a wall of these
+   reads as panels of colour rather than cards on a background. */
+[data-module="propresenter-now-next"] .nn-screen.nn-only-now {
+  gap: 0;
+  background: linear-gradient(
+    160deg,
+    color-mix(in srgb, var(--accent) 14%, transparent),
+    color-mix(in srgb, var(--bg) 70%, transparent)
+  );
+}
+[data-module="propresenter-now-next"] .nn-only-now .nn-now {
+  flex: 1;
+  height: auto;
+  min-height: 0;
+  justify-content: center;
+  border: none;
+  border-radius: 0;
+  background: none;
+  padding: 0;
+}
+/* The live dot and playlist ride over the gradient rather than above it. */
+[data-module="propresenter-now-next"] .nn-only-now .nn-top {
+  position: absolute;
+  inset: var(--nn-pad) var(--nn-pad) auto;
+  pointer-events: none;
+}
+[data-module="propresenter-now-next"] .nn-only-now .nn-title-box { margin-top: 0; }
+/* The overlay floats, so it takes no room — this keeps the title clear of it
+   and still centred, by holding back as much at the bottom as at the top. */
+[data-module="propresenter-now-next"] .nn-only-now:not(.nn-tight) .nn-now {
+  padding: calc(var(--unit) * 1.4) 0;
+}
+/* Too short for the overlay: the title gets the whole panel to itself. */
+[data-module="propresenter-now-next"] .nn-only-now.nn-tight .nn-top,
+[data-module="propresenter-now-next"] .nn-only-now.nn-tight.is-offline .nn-top {
+  display: none !important;
+}
+
 /* ── top row ── */
 
 [data-module="propresenter-now-next"] .nn-top {
@@ -59,6 +104,7 @@
   overflow: hidden;
   text-overflow: ellipsis;
 }
+[data-module="propresenter-now-next"] .nn-playlist[hidden] { display: none; }
 
 [data-module="propresenter-now-next"] .nn-live {
   display: flex;
@@ -71,6 +117,7 @@
   text-transform: uppercase;
   color: var(--muted);
 }
+[data-module="propresenter-now-next"] .nn-live[hidden] { display: none; }
 
 [data-module="propresenter-now-next"] .nn-live-dot {
   width: calc(var(--unit) * 0.6);
@@ -122,6 +169,7 @@
   text-transform: uppercase;
   color: var(--accent);
 }
+[data-module="propresenter-now-next"] .nn-label[hidden] { display: none; }
 
 [data-module="propresenter-now-next"] .nn-title-box {
   flex: 1;

modules/slack/client.js

@@ -141,13 +141,17 @@ const sendTarget = (() => {
     /**
      * Where a send goes, given the configured channels in admin order: the
      * selection while it is still configured and its transcript is on the
-     * page; otherwise the first configured channel.
+     * page, else the first configured channel that IS on this page — with one
+     * transcript up, that one — and only if the page shows none, the first
+     * configured channel. A send must never quietly go to a channel the
+     * operator cannot see.
      */
     resolve(configured) {
       const list = Array.isArray(configured) ? configured : [];
       if (!list.length) return '';
       if (id && list.includes(id) && this.hasTranscript(id)) return id;
-      return list[0];
+      const onPage = list.find((c) => this.hasTranscript(c));
+      return onPage || list[0];
     },
     on(fn) {
       bus.addEventListener('change', fn);
@@ -1100,7 +1104,7 @@ function createSendTile({ root, moduleApi, mode }) {
     if (stopped || !state) return;
     if (token) {
       if (composeEls) {
-        composeEls.line.textContent = sendingLine();
+        if (composeEls.line) composeEls.line.textContent = sendingLine();
         if (composeEls.input) composeEls.input.placeholder = placeholder();
       }
     } else renderGate();
@@ -1177,14 +1181,21 @@ function createSendTile({ root, moduleApi, mode }) {
   let composeEls = null;
   function buildCompose() {
     compose.textContent = '';
+    // Send message names the channel in the box's own placeholder and locks
+    // from the title bar, so a line above the field would only say both
+    // again. Quick replies has no placeholder — there it is the only place
+    // the target is named, so it stays.
+    let line = null;
+    if (mode !== 'send') {
       const head = el('div', 'sl-compose-head');
-    const line = el('span', 'sl-sending', sendingLine());
+      line = el('span', 'sl-sending', sendingLine());
       const lockLink = el('button', 'sl-lock-link', 'Lock');
       lockLink.type = 'button';
       lockLink.title = 'Lock now';
       lockLink.addEventListener('click', () => lock('Locked'));
       head.append(line, lockLink);
       compose.appendChild(head);
+    }
 
     const foot = el('div', 'sl-compose-foot');
     const msg = el('div', 'sl-msg');
@@ -1462,7 +1473,7 @@ function createSendTile({ root, moduleApi, mode }) {
       if (!s.sending?.enabled || !s.sending?.pinSet) return void lock('');
       if (!composeEls) return void showCompose(); // the page was unlocked before this tile appeared
       if (composeEls) {
-        composeEls.line.textContent = sendingLine();
+        if (composeEls.line) composeEls.line.textContent = sendingLine();
         if (composeEls.input) composeEls.input.placeholder = placeholder();
       }
     } else renderGate();

modules/slack/module.json

@@ -1,7 +1,7 @@
 {
   "id": "slack",
   "name": "Slack",
-  "version": "1.2.0",
+  "version": "1.2.1",
   "proddash": ">=1.4.0",
   "description": "Live transcripts of this location's Slack channels, plus PIN-protected sending as the location",
   "client": "client.js",
@@ -21,7 +21,7 @@
       "help": "Create a Slack app in the workspace (api.slack.com/apps → Create New App → From scratch) and, under OAuth & Permissions → User Token Scopes, add channels:history, channels:read, groups:history, groups:read, chat:write, users:read, reactions:write (emoji reactions) and emoji:read (the workspace's custom emoji). Sign in to Slack as this location's account — the one named for the campus — open the app's OAuth & Permissions page and press Install to Workspace (or Reinstall to Workspace), then copy the User OAuth Token (xoxp-…) it shows and paste it here: messages from this machine are then literally from the location. A bot token (xoxb-…) works too; it posts as the app, with \"Send as\" naming the location."
     },
     "Channels": {
-      "help": "Every channel picked here becomes its own transcript tile in the ＋ picker, titled with the channel's name. The Send message and Quick replies tiles post to whichever transcript was clicked last — its bottom edge lights up in the accent colour — and to the first channel here until one is clicked. Only channels the account has joined are listed; join one in Slack first. Each channel is read on its own schedule, all of them together kept inside Slack's rate limit."
+      "help": "Every channel picked here becomes its own transcript tile in the ＋ picker, titled with the channel's name. The Send message and Quick replies tiles post to whichever transcript was clicked last — its bottom edge lights up in the accent colour — and until one is clicked, to the first channel here whose transcript is on that dashboard: with a single transcript up, that one. A send never goes to a channel the dashboard is not showing. Only channels the account has joined are listed; join one in Slack first. Each channel is read on its own schedule, all of them together kept inside Slack's rate limit."
     },
     "Sending": {
       "toggle": "sendEnabled",
@@ -49,7 +49,7 @@
       "default": [],
       "group": "Channels",
       "optionsRoute": "/channels",
-      "help": "One transcript tile per channel; the first one is where sends go until a transcript is clicked. Only channels the account has joined are listed — join one in Slack first."
+      "help": "One transcript tile per channel; until a transcript is clicked, sends go to the first channel here that the dashboard is actually showing. Only channels the account has joined are listed — join one in Slack first."
     },
     "pollSeconds": {
       "type": "number",

package.json

@@ -1,8 +1,8 @@
 {
   "name": "proddash",
-  "version": "1.4.0",
+  "version": "1.5.0",
   "private": true,
-  "description": "Modular production dashboard for Waters Church — zero-dependency Node server + vanilla client",
+  "description": "Modular production dashboard for Waters Church \u2014 zero-dependency Node server + vanilla client",
   "license": "UNLICENSED",
   "engines": {
     "node": ">=18"

prodcom-listener/README.md

@@ -38,7 +38,7 @@ Edit [config.json](config.json):
 
 | Key | Meaning |
 | --- | --- |
-| `prodcomUrl` | Where the ProdCom API lives (default `http://10.3.11.152:24480`) |
+| `prodcomUrl` | Where the ProdCom API lives — set it per site, e.g. `http://<prodcom-host>:24480` |
 | `port` | Port this listener serves on (default `24481`) |
 | `apiKey` | Only needed if PSK auth is enabled in ProdCom settings |
 

prodcom-listener/config.json

@@ -1,5 +1,5 @@
 {
-  "prodcomUrl": "http://10.3.11.152:24480",
+  "prodcomUrl": "",
   "port": 24481,
   "apiKey": ""
 }

prodcom-listener/server.js

@@ -23,10 +23,15 @@ try {
   console.warn('config.json not found or invalid, using defaults/env vars');
 }
 
-const PRODCOM_URL = process.env.PRODCOM_URL || cfg.prodcomUrl || 'http://10.3.11.152:24480';
+const PRODCOM_URL = process.env.PRODCOM_URL || cfg.prodcomUrl || '';
 const PORT = Number(process.env.PORT || cfg.port || 24481);
 const API_KEY = process.env.PRODCOM_API_KEY || cfg.apiKey || '';
 
+if (!PRODCOM_URL) {
+  console.error('No ProdCom API configured. Set prodcomUrl in config.json (or the PRODCOM_URL');
+  console.error('environment variable) to this site\'s ProdCom, e.g. http://<prodcom-host>:24480');
+  process.exit(1);
+}
 const target = new URL(PRODCOM_URL);
 const PUBLIC_DIR = path.join(__dirname, 'public');
 

server.js

@@ -13,6 +13,8 @@
  * proddash.json in the data directory (this machine's overrides), or env vars:
  *   PORT               (default: value in proddash.json, else 24500)
  *   PRODDASH_PASSCODE  (overrides adminPasscode in proddash.json)
+ *   PRODDASH_FORGE     (overrides `forge`: "github", or a Gitea/Forgejo base
+ *                       URL such as http://10.3.8.90:3000)
  *   PRODDASH_DATA_DIR  (where module config + layouts are kept; see below)
  */
 'use strict';
@@ -764,15 +766,53 @@ function parseRepoSetting(value, fallbackBranch) {
 }
 
 const REPO = parseRepoSetting(process.env.PRODDASH_REPO || shellConfig.repo, shellConfig.branch)
-  || parseRepoSetting('michaelmcgary2008/ProdDash', 'main');
+  || parseRepoSetting('michael/ProdDash', 'main');
+
+/**
+ * Which server the code comes from. GitHub unless `forge` names another —
+ * give it a Gitea (or Forgejo) base URL, "http://10.3.8.90:3000", and updates
+ * and module installs come from there instead. The two hosts differ only in
+ * how an archive URL is spelled: the tarball itself is the same, pax header
+ * and commit sha included, so everything downstream is untouched.
+ */
+function parseForge(value) {
+  const s = String(value || '').trim().replace(/\/+$/, '');
+  if (!s || s.toLowerCase() === 'github') {
+    return { kind: 'github', base: 'https://github.com', archiveBase: 'https://codeload.github.com' };
+  }
+  if (!/^https?:\/\//i.test(s)) return null;
+  // A GitHub URL still means codeload for archives.
+  if (/^https?:\/\/(www\.)?github\.com$/i.test(s)) {
+    return { kind: 'github', base: s, archiveBase: 'https://codeload.github.com' };
+  }
+  return { kind: 'gitea', base: s, archiveBase: s };
+}
+
+const FORGE = parseForge(process.env.PRODDASH_FORGE || shellConfig.forge) || parseForge('github');
 /** Where branch archives come from; tests point this at a local mock. */
-const ARCHIVE_BASE = String(process.env.PRODDASH_ARCHIVE_BASE || 'https://codeload.github.com').replace(/\/+$/, '');
+const ARCHIVE_BASE = String(process.env.PRODDASH_ARCHIVE_BASE || FORGE.archiveBase).replace(/\/+$/, '');
 const REMOTE_TTL_MS = 10 * 60 * 1000;
 const REMOTE_CHECK_MS = 6 * 60 * 60 * 1000;
 const MAX_ARCHIVE_BYTES = 80 * 1024 * 1024;
 
 function tarballUrl() {
-  return `${ARCHIVE_BASE}/${REPO.owner}/${REPO.repo}/tar.gz/${encodeURIComponent(REPO.branch)}`;
+  const branch = encodeURIComponent(REPO.branch);
+  return FORGE.kind === 'gitea'
+    ? `${ARCHIVE_BASE}/${REPO.owner}/${REPO.repo}/archive/${branch}.tar.gz`
+    : `${ARCHIVE_BASE}/${REPO.owner}/${REPO.repo}/tar.gz/${branch}`;
+}
+
+/** The page a human should read to see what changed between two commits. */
+function forgeCompareUrl(from, to) {
+  return `${FORGE.base}/${REPO.owner}/${REPO.repo}/compare/${from}...${to}`;
+}
+
+/** The commit list for the branch we follow. */
+function forgeCommitsUrl() {
+  const branch = encodeURIComponent(REPO.branch);
+  return FORGE.kind === 'gitea'
+    ? `${FORGE.base}/${REPO.owner}/${REPO.repo}/commits/branch/${branch}`
+    : `${FORGE.base}/${REPO.owner}/${REPO.repo}/commits/${branch}`;
 }
 
 function httpError(status, message) {
@@ -929,11 +969,11 @@ function shellStatus() {
     else if (local.branch !== REPO.branch) blocker = `this checkout is on branch "${local.branch}", not "${REPO.branch}"`;
     else if (local.dirty) blocker = 'this checkout has local changes — commit or discard them first';
   }
-  const gh = `https://github.com/${REPO.owner}/${REPO.repo}`;
   return {
     version: SHELL_VERSION,
     repo: `${REPO.owner}/${REPO.repo}`,
     branch: REPO.branch,
+    forge: FORGE.base,
     local: { isGit: local.isGit, sha: local.sha, branch: local.branch, dirty: local.dirty },
     remote: { version: remote.version, sha: remote.sha, checkedAt: remote.checkedAt, error: remote.error },
     updateAvailable: versionBehind || commitsBehind,
@@ -941,8 +981,8 @@ function shellStatus() {
     method: local.isGit ? 'git' : 'archive',
     updateBlocker: blocker,
     changesUrl: local.sha && remote.sha
-      ? `${gh}/compare/${local.sha.slice(0, 12)}...${remote.sha.slice(0, 12)}`
+      ? forgeCompareUrl(local.sha.slice(0, 12), remote.sha.slice(0, 12))
-      : `${gh}/commits/${REPO.branch}`,
+      : forgeCommitsUrl(),
   };
 }
 
@@ -1693,7 +1733,7 @@ server.on('listening', () => {
     ? '  Modules     : ' + ids.map((id) => id + (isEnabled(id) ? '' : ' (disabled)') + (manifests.get(id).incompatible ? ' (needs newer ProdDash)' : '')).join(', ')
     : '  Modules     : none installed');
   console.log('  Settings    : ' + DATA_DIR + (DATA_DIR === REPO_CONFIG_DIR ? '  (inside the app folder)' : ''));
-  console.log('  Repo        : ' + REPO.owner + '/' + REPO.repo + '@' + REPO.branch);
+  console.log('  Repo        : ' + REPO.owner + '/' + REPO.repo + '@' + REPO.branch + '  (' + FORGE.base + ')');
 });
 
 // A restart hands the port over from the exiting ProdDash: wait for it.