Off, every timer sits in one grid filled row by row — a wrapping flex row
rather than a CSS grid, so the last row's cards widen to use the whole
width and nothing is left empty; a source in trouble is named in one line
above the cards, and its own cards dim. On, the sections per source come
back, and "Source headings" appears (showWhen) to hide their titles.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Which timers appear is the header's Timers ▾ menu's job, so the gear's
source switches (ProPresenter / LTC / module timers, the Clock on/off)
are gone. In their place the Show group offers the card's elements —
Names, Status lines, Detail lines, Seconds, Leading zeros, Source
headings; without seconds a countdown reads in whole minutes, rounded
up. The clock's format select is a 24-hour switch (an older layout's
"12h" choice is honoured); the clock card has no CLOCK label; Short day
and Short month appear once Date is on, and the date fits its card — one
line when it can, else a break after the day and a size that fits the
longer half. Solo tiles get the same element switches.
Shell: the settings window's grab bar is the accent colour and the gear
that opened it wears the same colour while it is open; showWhen works in
a tile's gear as it does on the admin page.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A ProPresenter count_down_to_time timer's detail line reads "to 9:30a"
(or "to 21:30" on a 24-hour clock) instead of a sentence. The status and
detail lines under the digits are drawn at 0.8 of the title's size, and
fit() budgets them at that share. A title that would be cut off shrinks
to fit its card (measured off-screen, down to 8 px) instead of ending in
an ellipsis; a changed label re-fits.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- The Timers ▾ menu's rows are rebuilt only when the row set or a switch
changes, not on every snapshot — rows no longer vanish from under a
click. Their on-state fill uses the shell's accent: the menu hangs off the
title bar, outside the tile root, where the tile's colour properties
don't reach.
- A long timer label ends in an ellipsis (the label is its own box inside
the flex name row).
- The warning window is capped at half a timer's length, so a 20 s
countdown isn't amber for its whole run (it warns under 10 s; a 25 min
one under 2:30).
- Server: the change key that gates SSE frames ignores startedAt (derived
from a whole-second value, it jittered ±500 ms per poll and doubled the
frame rate); ProPresenter errors name the cause (ECONNREFUSED) rather
than fetch's "fetch failed".
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Timers module becomes the one place a production tech looks for every
timer and clock: ProPresenter's timers as before, the LTC timecode, a
time-of-day clock (the Clock module's format / seconds / date, folded in as
a sub-part — modules/clock itself is untouched), and timers other modules
offer over the module guide's provider contract: PCO Plan's service /
current item / countdown, or anything else declaring provides: ["timers"].
Server: a small `sources` abstraction. Each source turns its own world into
the guide's standard timer objects and reports health — ProPresenter (the
existing poller, wrapped, behind ppEnabled), LTC (the existing listener,
untouched, as a kind:"clock" timer whose status.text is the timecode, with
fps/df/ageMs in an `ltc` extension), Clock, and one module source per
provider found in the shell's /api/modules over loopback (shell.port):
/timers/stream when it answers as SSE, else /timers polled every 2 s;
re-discovered every 30 s; backoff 3 s → 15 s; a provider's timers survive a
10 s grace and then go. PCO Plan sits behind pcoEnabled, the rest behind
moduleTimersEnabled. The module is itself a provider: GET /timers and
GET /timers/stream serve the merged set. The header comment says how to
add a platform in a dozen lines.
Client: one tile, every timer, grouped under source headings — label, the
big time derived locally from the snapshot and a server-offset-corrected
clock (so digits tick smoothly between snapshots), a status line, a detail
line. Countdowns count down, elapsed count up, clocks show the time; the
LTC card still counts frames. Feedback colours (running / warning near the
end / overrun / idle) are per-tile colour settings applied as custom
properties on the tile root, so they win over dashboard themes; left at
their defaults they follow the theme. Gear settings: Clock, ProPresenter
timers, LTC timecode, Module timers, Source headings, Status lines, the
clock's format / seconds / date; a "Timers ▾" header menu hides any single
timer (source:id, saved with the layout; the old hiddenItems and
timer:<uuid> / ltc picker variants keep working).
Manifest: 1.3.0, proddash >=1.4.0, provides timers, configGroups with a
toggle switch per integration (ProPresenter / LTC Timecode / PCO Plan /
Other modules) and group help; switch labels are nouns.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A new Display-group select (Default / Monospace) sets the font for the
timer and LTC digits. Monospace keeps the numbers from shifting sideways
as they change — easier to read on a fast-moving countdown or timecode.
Flows through server state → client applies a `tm-mono` class and re-fits
the digit sizing; both timer and LTC values (.tm-time) honor it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Simplify LTC to its one working source — the built-in audio listener — and
make the admin UI reflect it.
Module:
- Remove the stage-display websocket source (stage-ws.js, stagePassword)
and the /v1/timecode/status API probe — both dead on ProPresenter 21.4.
- Remove the remote-reader ingest (POST /ltc, ingestToken, tools/
ltc-reader.js): the module owns LTC end to end now. The decoder selftest
moves to modules/propresenter-timers/ltc.selftest.js so the engine stays
covered.
- composeLtc collapses to the listener: running/stopped/nosignal, or a
clear note when disabled / no device / capture failed / starting.
- Manifest: ltcEnabled is now a `switch`; ltcDevice and ltcChannel carry
showWhen:"ltcEnabled"; ProPresenter and LTC fields carry `group` labels.
Shell (admin) — backward-compatible additions, coordinate with the shell lane:
- New `switch` field type (boolean shown as the enable-toggle control).
- `group`: consecutive fields render under a labeled subsection.
- `showWhen: "<key>"`: a field is shown only while that boolean/switch is
on (and actually collapses — .field[hidden] override, since .field's
display:flex outranks the [hidden] UA default).
- applyConfigPatch coerces `switch` as boolean. Documented in MODULE-GUIDE.
Verified: engine selftest (29 checks); listener decodes BlackHole loopback
(running 30fps, ageMs); device picker lists inputs; POST /ltc now 404s;
admin shows two labeled groups, the switch, and device/channel appearing
only when the switch is on (computed display none↔flex confirmed).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ProPresenter 21.4 exposes no timecode through any API, so read the LTC
where it actually lives — the audio feed:
- tools/ltc-reader.js: zero-dependency SMPTE LTC decoder (biphase-mark,
adaptive bit clock, envelope-scaled comparator) fed s16le PCM on stdin
from ffmpeg/sox; POSTs running/stopped/nosignal + timecode + frame rate
(incl. 29.97 drop-frame) to the module. --selftest runs an encoder→
decoder suite (24/25/30 fps, DF minute counting, low level + noise + DC,
dropout recovery); --demo synthesizes live LTC through the real decoder
and ingest path with no audio hardware.
- Module: POST /ltc ingest route (optional bearer token, validated body,
6 s staleness with automatic fallback to the API probe / stage source),
richer LTC state (status, fps, df, reader source), health messages.
- Client: LTC card shows Running · <rate> / Stopped (held frame) /
No signal; works LTC-only with no ProPresenter host configured; the
reader-fed card no longer grays out when only ProPresenter is down.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adopt main's new multi-tile contract: the module's server exports
tiles() (answered from the poller's held state, never a fresh upstream
request) listing All timers, one entry per discovered timer, and LTC
timecode. The client branches on moduleApi.variant — solo tiles render
exactly one card with no selection menu, and a solo timer that vanishes
from ProPresenter shows a labeled "Not in ProPresenter" card instead of
erroring (visible even in the compact layout). pp-timers-mock gains
--drop=<uuid,...> to simulate a timer deleted in ProPresenter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New propresenter-timers module: polls /v1/timers + /v1/timers/current
(shapes verified against openapi.propresenter.com), probes the
undocumented /v1/timecode/status for LTC and honestly reports
"not available on this ProPresenter" when absent. Per-tile timer/LTC
selection via a Timers ▾ header menu (never-seen timers default on),
responsive auto-sized cards with state-derived colors (the API exposes
no per-timer color), unmistakable overrun. Includes tools/pp-timers-mock.js
for developing without a real ProPresenter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
