A module that sees something a tech must act on now (a timer overrun, a meter
past its limit, timecode gone) raises an alert on a channel, 1–6, and every
dashboard listening to that channel flashes: the menu bar — brought out for
the duration if it was hidden — and a frame round the screen alternate between
the level's two colours, with the alert's text bold across the bar. Low fades
slowly, medium faster, critical snaps with no fade and floods the board behind
the tiles too, in a muted cut that shows faintly through the tile panels
without costing their content any contrast.
Server: the hub. One alert per channel (a new one replaces the last), timed
out server-side (1–600 s, 15 by default, 0 = held until cleared), broadcast
over the shell stream as `alert` / `alert-clear`; GET /api/alerts for a
dashboard that opens or reconnects mid-alert; POST /api/alerts and
DELETE /api/alerts/<n>, open like a layout save. Modules raise from their
server entry with shell.alert() / shell.clearAlert() or from a tile with
moduleApi.alert() / moduleApi.clearAlert(); a module's alerts end when it
stops. Colours live as alerts.colors in the data directory's proddash.json.
Dashboard: the Layouts menu gains a folded Alerts row with six numbered
toggles; the channel list saves with the layout, local and named (the server
keeps it in a saved layout). Admin: a folded Alerts section with two colour
pickers per level, a swatch running each level's cadence, and a Test row.
Docs: docs/ALERTS.md (the feature), a "Raising alerts" section in the module
guide, README. Tools: tools/alert.js raises/clears/lists from the command
line; tools/alerts.test.js drives it all end to end.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three things about arranging a dashboard.
**Auto-hide bars.** A new button left of ⛶ folds every tile's title bar away
at once, for a windowed screen that should read like a wall display.
Fullscreen already did this for watching; this is the windowed equivalent,
asked for by hand. It starts off and saves with the layout, so a booth's
named layout loads with the bars already tucked away.
**A hidden bar is not a gone bar.** Folded away — by that switch or by a
tile's own notch — the bar leaves the flow and parks just above its tile, so
the module keeps the whole body and nothing reflows as the bar comes and
goes. Point at the tile's top edge and it slides back in over the content,
where its buttons click and its width drags the tile exactly as before. A
dashboard can now be arranged with every bar out of the way, which is the
point of hiding them.
**Every edge resizes.** The top, left and right edges join the bottom one:
each moves only itself, so the tile grows into the space beside it while the
opposite edge stays put, stopping at a neighbour or at the module's own
minimum. Where two tiles meet, that boundary already belongs to the seam
pill between them — it moves both edges and leaves no gap — so the two
tiles' side marks step aside there rather than offer a second, different
control on the same pixels.
One fix underneath: saving a named layout was dropping each tile's variant,
title, minimum size and hidden-bar state, so a saved "Now" tile came back as
the full Now/Next card and a solo timer came back with a full tile's
settings. The layout file now carries them — and the new switch with them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every header and top-bar button's title becomes a tip the shell shows the
moment the pointer arrives (the browser's own waits a second and looks
different everywhere); it moves from `title` to data-tip so the native one
never appears, and a module that sets `title` again is picked up on the
next hover. The shell's own labels are "Settings" and "Remove"; the top
bar's are "Fullscreen", "Add tile", "Layouts", "Admin"; Slack, PCO Plan,
ProdCom and Timers shorten theirs to match. A− / A+ are a drawn − and +
in Slack, PCO Plan and ProdCom, sized like every other header icon.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Every top-bar button is now an icon with a hover title and no text. The
Admin link uses the same cogwheel as the tile gears; the add button's ＋
glyph (font-dependent, uneven across browsers) is an SVG plus.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three things the dashboard was making people work for.
**The menu handle.** It was the ProdDash wordmark on a pill hanging past the
bar's bottom edge, which read as a step cut out of the bar. The wordmark goes
back in the bar where it belongs, and the handle becomes a small accent lip on
the bar's bottom edge — the same idea as a tile's notch — that grows under the
pointer so it stays easy to hit without being loud at rest.
That also fixes the animation Safari made a meal of: the old handle
transitioned font-size and line-height, animating text metrics frame by frame
on the way out. Nothing here animates text. The lip rides `--topbar-h`, the
bar's live height, so it tracks the bar's own collapse instead of running a
second animation against it, and its hover growth is width, height and
opacity only.
**Fullscreen.** Fullscreen is for watching, not arranging, so every tile's
title bar now folds away on the way in. A notch still peeks one open, and it
folds back ten seconds after the pointer leaves that tile — coming back to the
tile cancels the countdown. Peeking is a transient class, so a tile's own
hidden/shown preference is untouched and comes back with the screen.
**Tile settings.** Gear settings are display choices — a text size, a filter,
a colour — so they apply as they are changed and save with the layout. Apply
and Cancel are gone; close by clicking away, pressing Escape, or the gear
again. Typing is debounced so a remount doesn't land on every keystroke, and
an unchanged value remounts nothing (a text field fires input and then change
for one edit). The module guide says so now too.
Verified in the browser: settings apply live and persist, no-op changes cost
nothing, all three close paths work, and in fullscreen both heads fold, one
peeks, it folds back at ten seconds, returning the pointer cancels it, and
leaving fullscreen restores everything with no peeks left behind.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The show/hide handle is now the logo itself: a translucent accent pill
wrapped around "ProdDash" at the left of the bar, centred on the text, with
"Dash" in the background colour so it reads as a cutout inside the green.
The pill is far less opaque than the old solid tab (38% idle, brighter on
hover). When the bar hides, the text folds away and the pill shrinks to a
slim lip at the top-left edge, exactly where the old tab sat. An invisible
in-flow twin of the logo keeps the bar's layout unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
The menu bar's show/hide tab was centred on the screen, exactly where a
centred tile's own title-bar tab lands once both bars are hidden: two
identical tabs on top of each other, with the tile's unreachable. The tab
now sits at the left under the ProdDash brand and wears the accent colour,
so it never coincides with a tile tab and reads unmistakably as the
dashboard's. To keep it off a top-row tile's status dot and title it
straddles the bar's bottom edge while the bar is shown (mostly on the bar,
a short lip below) and becomes a slim tab at the very top edge when the bar
is hidden.
The Admin link is hidden in fullscreen, including when the menu bar is
brought back there.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Title bars (tiles and the main menubar, which gains the same notch tab)
now collapse and reopen with a height animation instead of popping. The
menubar's hidden state persists per browser. ProdCom timestamps move
inline to the right of the channel name, keeping their text style; the
clock button toggles just their visibility. New fullscreen button (left
of ＋): entering fullscreen auto-hides the menubar and auto-fits the
layout — occupied columns stretch proportionally across the width, tiles
whose bottom edge lands within two rows of the viewport bottom stretch
to end exactly at it, small tiles (h ≤ 2) alone in their columns are
exempt, and scrolling is disabled when nothing extends below the fold
(deeper layouts keep natural rows and scrolling). All fullscreen fitting
is visual-only and reverts on exit; editing affordances are parked while
in it. Corner resize indicators now appear only on tile hover, and a
second resize handle on the bottom-left corner resizes from that edge.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Topbar: the add button is now just ＋ and the layout button a 3-segment
grid icon (two squares + one tall rectangle). Modules no longer build
their own toolbars — moduleApi.header.addButton/addMenu put controls in
the tile's title bar next to the gear/close (menus are fixed-positioned
by the shell so a tile's overflow can't clip them, and everything a
module adds is removed automatically on unmount). Each title bar grows a
notch on its bottom edge that hides/shows the bar, ProdCom-Listener
style; the choice persists with the layout. Modules renamed: ProdCom and
ProPresenter. The ProdCom tile regains the original listener tools as
icon buttons in its title bar: timestamps toggle (clock), A−/A+ text
size, jump-to-latest, and a circle-with-cross clear button, plus the
Channels menu. MODULE-GUIDE documents the header API; README updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Milestone 7. docs/MODULE-GUIDE.md documents the whole module contract
from an author's point of view — manifest reference, client factory +
moduleApi, server init/routes/health, scoping and resilience rules, a
copy-paste minimal module, and a testing section with the two mocks and a
resilience checklist. README rewritten with run/configure/use
instructions in the prodcom-listener style, plus double-click launchers
for macOS and Windows. PWA: manifest, icons, and a minimal network-first
service worker that never touches /api/*.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Milestone 1 of SPEC.md. Zero-dependency Node server serving public/;
12-column tile grid with add (placeholder tile), drag to move, drag to
resize, remove; collision-free placement; layout autosaves to this
browser's localStorage and survives reload.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
