Every shipped module had an entry under "Included modules" except Slack,
which wasn't mentioned anywhere in the README — so the one module that can
send as the campus was also the one nobody could read about.
Its entry now sits with the others, in their shape: what it does, the tiles
it offers in the ＋ picker (one transcript per configured channel plus the
two single send surfaces), its four admin groups and its tile settings —
all taken from modules/slack/module.json and client.js.
The testing paragraph listed the ProdCom, ProPresenter and PCO mocks but
not the Slack one, though CLAUDE.md has documented it all along; it is now
there with the SLACK_API_BASE line it needs.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The shipped defaults pointed at GitHub, so a fresh install with no
configuration would have looked there — and that repository is going away.
They now name michael/ProdDash on chronicles-ab.waterschurch.org:3000, which
a fresh install was verified to reach with nothing configured at all.
The hostname rather than the IP, because the UniFi DNS record is
authoritative and this survives the NAS changing address. Both production
machines already carry an explicit setting of their own, so neither is
affected either way.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ProdDash fetched one tar.gz of the branch from GitHub's codeload host, with
that URL shape hardcoded. A `forge` setting now names where the code comes
from: absent or "github" behaves exactly as before, and a Gitea or Forgejo
base URL such as http://10.3.8.90:3000 fetches from a server of your own.
Gitea spells an archive URL differently — /archive/<branch>.tar.gz rather
than /tar.gz/<branch> — and that is the only real difference. Its tarball
carries the same pax header with the same commit hash, so the archive
parser, update detection and module installs are untouched. The "what
changed" link follows the forge too, using each one's own compare and
commits paths.
Verified against both: the same commit and version come back from GitHub
and from a self-hosted Gitea, and a module installs from each.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The module used to proxy each browser's transcript stream to ProdCom one
to one, so N screens meant N upstream connections and N history reads.
It now follows ProdCom once: it keeps the channel list, the groups and
the last 300 entries, and gives every browser a snapshot on connect
(`state`) plus each changed entry as it happens (`entry`), with `clear`
and `status` frames as the link changes. Reconnects back off from 2 s to
15 s, re-read the lists and history, and re-send the snapshot. The tile
no longer loads anything itself; the admin readout says how many channels
and entries the server holds. The /prodcom/* proxy is gone.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Server: one THEMES list; `theme` is read from the data directory's proddash.json like port/adminPasscode; GET /api/theme is public (dashboards need it before anyone logs in) and returns { theme, themes: [{ id, name, colors: { bg, panel, accent } }] }; POST /api/admin/theme { theme } validates against the list, writes the key into proddash.json keeping every other key, updates the in-memory value and broadcasts a `theme` shell event over /api/events.
style.css: four html[data-theme] variable sets appended at the end — Harbor (navy/cyan), Graphite (charcoal/blue), Ember (warm black/orange) and Daylight (light, for daytime FOH) — each swapping exactly the eight palette variables; :root stays Booth, the default.
shell.js: a self-contained theme section — the last-known theme (localStorage proddash:theme) goes on synchronously, then the server's answer, then live changes via the SSE event; one listener line added in subscribeEvents. Tile-configured colours are set on the tile and still win.
README: a Themes subsection under Configure and the `theme` row in the proddash.json key table.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Installing is dragging ProdDash to Applications. The app carries the
dashboard and the Node that runs it, so nothing has to be installed first and
nothing can go missing underneath it.
ProdDash.app/Contents/
MacOS/ProdDash the launcher
Resources/node/bin/node Node 24.21.0 LTS, fetched and checksum-verified
Resources/app/ server.js, public/, modules/
Everything mutable stays where it already was, in ~/Library/Application
Support/ProdDash — and that now includes app/, the copy of ProdDash that
actually runs. The copy is not ceremony: ProdDash updates itself in place,
and nothing may write inside a signed .app. So the bundle holds a read-only
baseline and the data directory holds the running copy, which means both
routes to a new version keep working and don't fight — installing a newer
.app replaces the copy, while a copy that has already updated itself past the
bundle is left alone.
build.sh now assembles all of it: fetches Node against nodejs.org's published
checksums (cached in .cache/), embeds the server, compiles each module's
native helper so the Mac running ProdDash needs no compiler, signs nested
code before the bundle, and builds the disk image. --dev skips the payload
for launcher work, which still runs against a checkout.
Signing is set up for a Developer ID with the hardened runtime and
notarisation (--notarize), and falls back to ad-hoc when no such certificate
is installed. Entitlements are split by what each binary actually does: JIT
for node, audio input for the launcher and for module helpers that read one.
Built and run end to end: first-run install, bundled node, dashboard and
admin serving, re-seed in both directions (newer app replaces an older copy;
an updated copy survives), disk image mounts and its app verifies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A native Swift app (launcher/macos, ~2 MB, no dependencies) that starts,
stops and watches over the server from the menu bar — and holds the macOS
permissions its modules need.
The permissions are the point as much as the buttons are. macOS grants
privacy permissions to the application that owns a process, and a child
inherits its parent's identity, so with the server started from here node —
and the Timers module's ltc-capture — belong to this app bundle and the
microphone and local-network prompts are asked, and remembered, as ProdDash.
Started over SSH or from a launchd job there is nobody to ask: the permission
is silently absent rather than refused, which is the "endless zeroes" failure
ltc-listener.js warns about.
The shell was already built for a supervisor: with PRODDASH_LAUNCHER=1 it
exits 75 instead of respawning itself when the admin page applies an update,
which the launcher reads as a restart request rather than a fault. Crashes
get a backed-off restart (1s, 2s, 5s, 10s) and four in two minutes stops the
cycle. The server is spawned into its own process group, so stopping it also
stops anything it started — an orphaned ltc-capture would otherwise hold an
audio device indefinitely — and signals, a logout and Quit all stop it first.
- Menu bar: ProdDash's own 2x2 tile mark, its accent tile lit green while
serving, amber mid-move, red when something needs a person. Start, stop,
restart, open the dashboard or admin, open at login, quit.
- Window: status and both addresses, plus Log (also written to
~/Library/Logs/ProdDash, kept a week), Settings, and Permissions.
- The port is written to the data directory's proddash.json — ProdDash's own
file — so the port set here holds however it is next started. Something
already on the port is reported, and offered as a takeover when it answers
like a ProdDash started another way.
- Modules declare what they need in their manifests ("permissions": [...],
documented in docs/MODULE-GUIDE.md and ignored by the shell); the launcher
lists exactly that, with each module's reason, asks for the microphone,
and — since macOS reports nothing about local network access — offers a
check that browses for services and tries every configured upstream.
Timers, ProdCom and ProPresenter modules declare their permissions (patch
bumps). Build with launcher/macos/build.sh; output is gitignored.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Resolves the admin form conflicts in favour of this branch's grouped /
collapsible / dependent-select additions (the base hunks were the timers
lane's, ported verbatim), keeps both sides of the README and module-guide
edits, and adopts main's versioning rules: the shell moves to 1.3.0 for the
new schema features (configGroups / instanceGroups, help, color fields,
grouped and dependent selects) and pco-plan 1.3.0 declares
"proddash": ">=1.3.0".
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three changes to the ProdCom tile, all per-tile and persisted with the
layout (version 1.2.0):
- A title-bar button flips the transcript between top-down (newest at the
bottom, still the default) and bottom-up. It is CSS only — the entries
container becomes column-reverse, DOM order is untouched — but everything
that follows "latest" flips with it: auto-follow, jump-to-latest, the
near-latest scroll test, and the "New messages" pill, which moves to the
top of the tile and points up.
- The "Channels ▾" text button is now a funnel icon. It keeps what the
label carried: while any channel is hidden the icon takes the accent
color and a compact "3/4" count sits beside it, with the full wording in
the tooltip.
- Tile settings drop the channel-name filter and text size, both of which
the title bar already handles, and gain "Show channel icons" for the
per-entry avatars. Removing the channel filter made its code dead, so
channelFilter(), filteredOut() and the data-channel-name attribute went
with it — the menubar's hidden-channel set is now the only filter.
Text size keeps working without a schema entry: the A−/A+ buttons persist
it through saveInstanceSettings, the shell's settings popover only writes
schema keys so it survives an Apply, and the client falls back to 15px when
it is absent. Existing tiles have no saved showAvatars value and the check
is `=== false`, so they keep their icons.
Verified against tools/prodcom-mock.js: both directions render and
auto-follow correctly, the pill appears at the right end and jumps to the
newest entry, the count badge tracks the channel toggles, a tile bumped to
19px kept it across an Apply and a reload, a freshly added tile started at
15px with icons shown, and two tiles held independent state.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Top bar (template, item-type tint, key color) and the whole show/hide
checklist move from admin config to instanceSchema, grouped in the gear
popover ("Top bar" open, "Show / hide" folded, three columns). They are
browser-side choices stored with the layout, not server state. Admin now
holds only credentials, service type, plan, poll interval and the
ProPresenter follow switch. noteCategories moves to the tile too.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Drops the separate setup page: the service type is a select grouped by
Planning Center folder path (GET /service-types), the pinned plan a
select of upcoming/recent plans that follows the chosen service type
(GET /plans?serviceTypeId=), credentials sit in a group that folds once
saved.
- Show/hide moves from per-tile settings to a server-wide checklist in
Admin (three columns, folded by default): top bar, series, part, service
type, date, service time, total length, running clock, countdown,
headers, item numbers, start times, length, type badge, key, arrangement,
author/CCLI, description, notes, pre/post-service items, now indicator,
item runtime, dim completed, ProPresenter line. Tiles keep only text
size and auto-scroll.
- Top bar text is a template with placeholders ({series} • {part} |
{serviceType} • {date} by default; • separates droppable segments, |
starts the second line).
- Song key: larger, admin-chosen color (blue by default), always right
after the title and before the type badge. Section headers are
full-width accent bands. Optional background tint per item type.
- tools/pco-mock.js plan titles are part numbers, as in a real series.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A new Display-group select (Default / Monospace) sets the font for the
timer and LTC digits. Monospace keeps the numbers from shifting sideways
as they change — easier to read on a fast-moving countdown or timecode.
Flows through server state → client applies a `tm-mono` class and re-fits
the digit sizing; both timer and LTC values (.tm-time) honor it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The show/hide handle is now the logo itself: a translucent accent pill
wrapped around "ProdDash" at the left of the bar, centred on the text, with
"Dash" in the background colour so it reads as a cutout inside the green.
The pill is far less opaque than the old solid tab (38% idle, brighter on
hover). When the bar hides, the text folds away and the pill shrinks to a
slim lip at the top-left edge, exactly where the old tab sat. An invisible
in-flow twin of the logo keeps the bar's layout unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Simplify LTC to its one working source — the built-in audio listener — and
make the admin UI reflect it.
Module:
- Remove the stage-display websocket source (stage-ws.js, stagePassword)
and the /v1/timecode/status API probe — both dead on ProPresenter 21.4.
- Remove the remote-reader ingest (POST /ltc, ingestToken, tools/
ltc-reader.js): the module owns LTC end to end now. The decoder selftest
moves to modules/propresenter-timers/ltc.selftest.js so the engine stays
covered.
- composeLtc collapses to the listener: running/stopped/nosignal, or a
clear note when disabled / no device / capture failed / starting.
- Manifest: ltcEnabled is now a `switch`; ltcDevice and ltcChannel carry
showWhen:"ltcEnabled"; ProPresenter and LTC fields carry `group` labels.
Shell (admin) — backward-compatible additions, coordinate with the shell lane:
- New `switch` field type (boolean shown as the enable-toggle control).
- `group`: consecutive fields render under a labeled subsection.
- `showWhen: "<key>"`: a field is shown only while that boolean/switch is
on (and actually collapses — .field[hidden] override, since .field's
display:flex outranks the [hidden] UA default).
- applyConfigPatch coerces `switch` as boolean. Documented in MODULE-GUIDE.
Verified: engine selftest (29 checks); listener decodes BlackHole loopback
(running 30fps, ageMs); device picker lists inputs; POST /ltc now 404s;
admin shows two labeled groups, the switch, and device/channel appearing
only when the switch is on (computed display none↔flex confirmed).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adopts the new contract: the manifest declares "proddash": ">=1.2.0"
(this module's admin device picker needs the optionsRoute select support
this branch adds), module version 1.2.0, and the shell version bumps
1.1.0 → 1.2.0 for that admin capability. The optionsRoute paragraph
merged into the guide's new schema section cleanly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ProdDash now has a version (package.json, 1.1.0) and modules declare the
shell versions they need ("proddash": ">=1.1.0" in the manifest). A module
whose requirement this shell doesn't meet is listed in the admin page but
never loaded, and cannot be installed from the catalog.
Modules come from two places: bundled with the checkout (modules/) and
installed from the admin page into the data directory (<data dir>/modules/).
Same id in both → the newer version runs; a downloaded copy the bundled one
has overtaken is removed. The admin page's new "Available modules" section
lists modules in the ProdDash repo that aren't installed here — one small
tar.gz of the branch is fetched (at most every few minutes, only while the
admin page is open or for the periodic update check) and read with a
dependency-free tar reader (ustar, GNU long names, pax headers; the pax
global comment carries the commit sha). Install downloads the module folder
into the data directory and mounts it immediately; a module card offers
"Update to vX" when the repo has a newer version. Uninstall removes an
installed module's files; a bundled module is hidden instead (its folder
belongs to the app) and can be restored from Available modules without a
download. Settings are kept across uninstall/reinstall.
Shell updates: the server compares the repo's package.json version and
commit sha with its own (git rev-parse when the app folder is a checkout),
shows a banner in the admin page, and "Update now" brings the app folder up
to date — git pull --ff-only for a checkout that is on the repo branch with
no local changes (file modes ignored), otherwise the archive is unpacked over
the folder (runtime state and .git untouched). The server then exits with
code 75 and starts its own replacement unless PRODDASH_LAUNCHER is set; the
replacement waits for the port to free up (EADDRINUSE retry). The page polls
until the new version answers. PRODDASH_REPO (owner/repo#branch),
PRODDASH_ARCHIVE_BASE and PRODDASH_NO_REMOTE_CHECK configure/disable it.
Docs: MODULE-GUIDE gets the rules every module follows (all settings in the
admin page, dependencies shipped inside the module, everything runs inside
the module's server entry — no helper programs, declare the ProdDash
requirement and bump the version), the proddash/version manifest fields and
the new installation story; README gets "Installing modules and updating";
CLAUDE.md summarises the rules.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
New module modules/pco-plan: reads the current plan for a chosen Planning
Center Services service type (PAT or OAuth token), streams items with start
times, lengths, keys, descriptions and item notes to tiles (every detail a
per-tile show/hide setting), and follows the propresenter-now-next module's
live item over loopback SSE to highlight the current plan item and track
elapsed vs planned runtime. Ships its own setup page
(/modules/pco-plan/setup.html) to browse folders and pick the service type
through the shell admin API, plus tools/pco-mock.js for development.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The menu bar's show/hide tab was centred on the screen, exactly where a
centred tile's own title-bar tab lands once both bars are hidden: two
identical tabs on top of each other, with the tile's unreachable. The tab
now sits at the left under the ProdDash brand and wears the accent colour,
so it never coincides with a tile tab and reads unmistakably as the
dashboard's. To keep it off a top-row tile's status dot and title it
straddles the bar's bottom edge while the bar is shown (mostly on the bar,
a short lip below) and becomes a slim tab at the very top edge when the bar
is hidden.
The Admin link is hidden in fullscreen, including when the menu bar is
brought back there.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
The LTC listener now lives inside the module: it spawns the native
ltc-capture helper (moved into the module folder, compiled on first use,
exact-name device matching) for the admin-selected input device, extracts
the configured channel, and decodes SMPTE LTC in-process (ltc.js — the
engine, shared with tools/ltc-reader.js, which remains the remote-machine
option posting to /ltc).
Admin config: an "LTC listener" switch, an audio-device select populated
live from the new GET /ltc/devices route, and a 1-based channel number.
The switch off means LTC is gone entirely: no LTC entry in the Add-tile
picker, no LTC row in the Timers menu or All-timers grid, no stage/API
probes, and POST /ltc answers 409. Source precedence with it on:
listener-with-data, fresh remote reader, listener's own no-signal verdict,
then the legacy API/stage chain.
Shell (admin page): `select` fields learn `optionsRoute` — options fetched
from a module route at render, saved value kept selectable when the route
or device is gone. Documented in MODULE-GUIDE; backward compatible.
Coordinate with the shell lane before its next admin.js change.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Tiles get a third resize handle: a pill on the bottom edge (hover-only,
between the two corner handles) that moves that edge. With nothing directly
below, it changes just the tile's height. When other tiles share the edge,
the drag trades rows with them so the column keeps its total height — the
vertical counterpart of the seam pill. Clamped to every tile's minimum
height; blocked by collisions like the corner handles.
Fullscreen auto-fit reworked so columns actually reach the bottom of the
screen. The old rule only stretched tiles whose bottom edge was within two
rows of the viewport bottom, which on a display taller than the browser
window the layout was designed in left a blank band below every column.
Now the bottom-most tile of each column stretches to the bottom regardless
of distance. Short tiles (h <= 2, the clock) are never stretched into a
ribbon: under another tile they drop to the bottom edge and the tile above
grows into the gap (stopping at anything else below it); alone in their
columns they stay put. The fit re-runs from a ResizeObserver on the grid
area, so the browser's animated fullscreen transition and the menubar
collapse both settle into a correct fit (replaces the resize/transitionend
listeners).
README documents the pill and the fullscreen behaviour.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Connection settings, API keys, enabled flags and named layouts were written
to config/ inside the checkout, so a re-clone or reset from main started the
server with nothing configured. They now live in a data directory outside
the app folder:
Windows %APPDATA%\ProdDash
macOS ~/Library/Application Support/ProdDash
other $XDG_CONFIG_HOME/proddash, else ~/.config/proddash
PRODDASH_DATA_DIR overrides the location (a relative path resolves against
the app folder, so "config" restores the old spot). The first start after
upgrading copies an existing config/modules.json and config/layouts/ into
the data directory, so nothing has to be re-entered. If the directory cannot
be created or written, the server warns and falls back to config/ rather
than refusing to start. A proddash.json in the data directory overrides the
checked-in defaults (port, adminPasscode).
The startup banner prints the directory in use, /api/admin/state exposes it,
and the admin page shows it under the Modules heading. Admin config and
layout writes that fail on disk now report the path instead of a generic
server error. README, MODULE-GUIDE and CLAUDE.md updated.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
LTC usually rides one input of a console bus or Dante/MADI interface, and
downmixing it into program audio (-ac 1) corrupts the bit transitions. New
flags --channels <n> (interleaved count of the stdin stream, no practical
upper bound) and --ch <n> (1-based pick) deinterleave in the reader, so
the capture command stays a plain passthrough. The extractor keeps frame
alignment across arbitrary chunk splits; selftest adds an LTC-on-5-of-8
case fed in odd-sized chunks. Mono remains the default.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ProPresenter 21.4 exposes no timecode through any API, so read the LTC
where it actually lives — the audio feed:
- tools/ltc-reader.js: zero-dependency SMPTE LTC decoder (biphase-mark,
adaptive bit clock, envelope-scaled comparator) fed s16le PCM on stdin
from ffmpeg/sox; POSTs running/stopped/nosignal + timecode + frame rate
(incl. 29.97 drop-frame) to the module. --selftest runs an encoder→
decoder suite (24/25/30 fps, DF minute counting, low level + noise + DC,
dropout recovery); --demo synthesizes live LTC through the real decoder
and ingest path with no audio hardware.
- Module: POST /ltc ingest route (optional bearer token, validated body,
6 s staleness with automatic fallback to the API probe / stage source),
richer LTC state (status, fps, df, reader source), health messages.
- Client: LTC card shows Running · <rate> / Stopped (held frame) /
No signal; works LTC-only with no ProPresenter host configured; the
reader-fed card no longer grays out when only ProPresenter is down.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ProPresenter's HTTP API has no timecode route (verified: 21.4 returns
404), but its classic stage-display websocket still answers — so LTC now
comes from a stage layout field labeled "LTC": a zero-dependency RFC6455
client (stage-ws.js) authenticates (new stagePassword admin config),
resolves the LTC-labeled frame's uid from the layout list, and treats any
message carrying that uid as the timecode text. "Receiving" is a 2.5s
staleness heuristic; frozen or placeholder text reads as no-signal. The
HTTP probe stays authoritative when it ever answers (a 404 verdict is
retried once a minute), and the LTC card surfaces the reason when
timecode is unavailable (bad stage password, no LTC field). pp-timers-mock
grows a /stagedisplay websocket with --stage-pwd and --no-ltc-field to
exercise every path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New configSchema type 'endpoint' declared in the module spec: anything
that points at a device or service on the network must be one endpoint
field, rendered identically for every module in /admin as a joined
Host/IP : Port control and stored/handed to the module server as
{ host, port }. Migrates all three connection modules — ProdCom (was a
full URL field), ProPresenter and Timers (were separate host + port
fields). Legacy stored configs (prodcomUrl / flat host+port) keep
working until the admin form is re-saved, at which point the new shape
replaces them. MODULE-GUIDE documents the type and the presentation
rule: no split host/port fields, and full URLs only for genuine web
addresses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Adopt main's new multi-tile contract: the module's server exports
tiles() (answered from the poller's held state, never a fresh upstream
request) listing All timers, one entry per discovered timer, and LTC
timecode. The client branches on moduleApi.variant — solo tiles render
exactly one card with no selection menu, and a solo timer that vanishes
from ProPresenter shows a labeled "Not in ProPresenter" card instead of
erroring (visible even in the compact layout). pp-timers-mock gains
--drop=<uuid,...> to simulate a timer deleted in ProPresenter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New propresenter-timers module: polls /v1/timers + /v1/timers/current
(shapes verified against openapi.propresenter.com), probes the
undocumented /v1/timecode/status for LTC and honestly reports
"not available on this ProPresenter" when absent. Per-tile timer/LTC
selection via a Timers ▾ header menu (never-seen timers default on),
responsive auto-sized cards with state-derived colors (the API exposes
no per-timer color), unmistakable overrun. Includes tools/pp-timers-mock.js
for developing without a real ProPresenter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Topbar: the add button is now just ＋ and the layout button a 3-segment
grid icon (two squares + one tall rectangle). Modules no longer build
their own toolbars — moduleApi.header.addButton/addMenu put controls in
the tile's title bar next to the gear/close (menus are fixed-positioned
by the shell so a tile's overflow can't clip them, and everything a
module adds is removed automatically on unmount). Each title bar grows a
notch on its bottom edge that hides/shows the bar, ProdCom-Listener
style; the choice persists with the layout. Modules renamed: ProdCom and
ProPresenter. The ProdCom tile regains the original listener tools as
icon buttons in its title bar: timestamps toggle (clock), A−/A+ text
size, jump-to-latest, and a circle-with-cross clear button, plus the
Channels menu. MODULE-GUIDE documents the header API; README updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Tiles now sit with zero gap (their 1px borders are the only seam) and the
grid runs edge to edge. Wherever two tiles share a vertical edge, an
invisible strip sits on the seam; hovering reveals a small grab pill
(split-view style) and dragging it moves the shared edge, trading width
between the two tiles. The combined span is preserved, both tiles' min
sizes are honored, and a third tile sitting behind part of the seam
blocks the drag instead of being overlapped. Pills hide during tile
drags/resizes and rebuild for the new geometry on release; seam sizes
persist with the layout. Also fixes cellMetrics treating a 0px grid gap
as falsy and falling back to 10px.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Milestone 7. docs/MODULE-GUIDE.md documents the whole module contract
from an author's point of view — manifest reference, client factory +
moduleApi, server init/routes/health, scoping and resilience rules, a
copy-paste minimal module, and a testing section with the two mocks and a
resilience checklist. README rewritten with run/configure/use
instructions in the prodcom-listener style, plus double-click launchers
for macOS and Windows. PWA: manifest, icons, and a minimal network-first
service worker that never touches /api/*.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
