ProPresenter reports running timers as truncated whole seconds, and the
poller re-anchored the tiles' local count at the bottom of that second on
every 500 ms poll — so the displayed digit ran up to a second ahead and
got yanked back a step whenever a fresh poll sampled the next flip later
than the last one did. Tiles flickered ...12:33 → 12:34 → 12:33... about
once a second.
phase.js turns the quantized reports into one stable anchor per timer:
the only information in a poll is a FLIP (the report stepping one second
in the direction of travel), which dates the true boundary to the
midpoint of the two polls that straddle it. While reports stay consistent
with the anchor (±450 ms) the anchor holds, so tiles count along one
steady clock; a report the anchor can't explain (reset, seek, resume,
accumulated drift) re-anchors. Timers carry the anchor as a per-timer
asOf the client extrapolates from (optional in the provider contract,
documented in the guide); the client additionally refuses to tick a
running card backwards over sub-1.5 s jitter.
phase.selftest.js (66 checks) drives a simulated ProPresenter — truncated
reports, jittered polls — through the tracker and the client's render
math: digits never step backwards, dwells hold 1 s (the ~2 s zero-crossing
dwell is trunc's honest behavior), anchors stay within tolerance of the
true value, resets snap, pause/resume re-locks, 0.2% clock drift is
absorbed. Verified live against tools/pp-timers-mock.js: 78 s of 100 ms
DOM sampling across four running cards — every step ±1 in the card's own
direction, dwells 998–1002 ms, zero regressions; upstream kill/restart
still recovers.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Which timers appear is the header's Timers ▾ menu's job, so the gear's
source switches (ProPresenter / LTC / module timers, the Clock on/off)
are gone. In their place the Show group offers the card's elements —
Names, Status lines, Detail lines, Seconds, Leading zeros, Source
headings; without seconds a countdown reads in whole minutes, rounded
up. The clock's format select is a 24-hour switch (an older layout's
"12h" choice is honoured); the clock card has no CLOCK label; Short day
and Short month appear once Date is on, and the date fits its card — one
line when it can, else a break after the day and a size that fits the
longer half. Solo tiles get the same element switches.
Shell: the settings window's grab bar is the accent colour and the gear
that opened it wears the same colour while it is open; showWhen works in
a tile's gear as it does on the admin page.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A ProPresenter count_down_to_time timer's detail line reads "to 9:30a"
(or "to 21:30" on a 24-hour clock) instead of a sentence. The status and
detail lines under the digits are drawn at 0.8 of the title's size, and
fit() budgets them at that share. A title that would be cut off shrinks
to fit its card (measured off-screen, down to 8 px) instead of ending in
an ellipsis; a changed label re-fits.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Layouts saved before Timers 1.3.0 hold 'timer:<uuid>' and 'ltc' tiles.
An entry's aliases let those tiles get the entry's slim gear settings
instead of falling back to the module's full schema.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An "All timers" tile keeps the full set — sources, headings, status lines,
the clock's format (now behind the Clock group's title-row switch), the
colours. A solo tile's entry carries only what its one card can use: a
ProPresenter or module timer gets Status lines and the four colours; the
LTC timecode Status lines and the three tones it takes (running, no
signal, stopped); the time-of-day clock its format, seconds and date
alone; a clock another module offers its format plus the idle tone.
Every field is still defined once, in module.json; server.js composes the
subsets from it. The client resolves an absent setting from its own
DEFAULTS rather than from whatever schema the tile has, so a slimmer
schema changes nothing about what a tile shows. Entry descriptions are
one-sentence picker tooltips now.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Timers admin had a fourth group, "Other modules", whose one switch gated
every timer provider that wasn't PCO Plan. A provider that earns a switch
earns a section of its own — so the catch-all goes, any other provider found
is consumed as soon as it appears, and its name (not "Other modules") is what
the health readout lists it under.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- The Timers ▾ menu's rows are rebuilt only when the row set or a switch
changes, not on every snapshot — rows no longer vanish from under a
click. Their on-state fill uses the shell's accent: the menu hangs off the
title bar, outside the tile root, where the tile's colour properties
don't reach.
- A long timer label ends in an ellipsis (the label is its own box inside
the flex name row).
- The warning window is capped at half a timer's length, so a 20 s
countdown isn't amber for its whole run (it warns under 10 s; a 25 min
one under 2:30).
- Server: the change key that gates SSE frames ignores startedAt (derived
from a whole-second value, it jittered ±500 ms per poll and doubled the
frame rate); ProPresenter errors name the cause (ECONNREFUSED) rather
than fetch's "fetch failed".
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Timers module becomes the one place a production tech looks for every
timer and clock: ProPresenter's timers as before, the LTC timecode, a
time-of-day clock (the Clock module's format / seconds / date, folded in as
a sub-part — modules/clock itself is untouched), and timers other modules
offer over the module guide's provider contract: PCO Plan's service /
current item / countdown, or anything else declaring provides: ["timers"].
Server: a small `sources` abstraction. Each source turns its own world into
the guide's standard timer objects and reports health — ProPresenter (the
existing poller, wrapped, behind ppEnabled), LTC (the existing listener,
untouched, as a kind:"clock" timer whose status.text is the timecode, with
fps/df/ageMs in an `ltc` extension), Clock, and one module source per
provider found in the shell's /api/modules over loopback (shell.port):
/timers/stream when it answers as SSE, else /timers polled every 2 s;
re-discovered every 30 s; backoff 3 s → 15 s; a provider's timers survive a
10 s grace and then go. PCO Plan sits behind pcoEnabled, the rest behind
moduleTimersEnabled. The module is itself a provider: GET /timers and
GET /timers/stream serve the merged set. The header comment says how to
add a platform in a dozen lines.
Client: one tile, every timer, grouped under source headings — label, the
big time derived locally from the snapshot and a server-offset-corrected
clock (so digits tick smoothly between snapshots), a status line, a detail
line. Countdowns count down, elapsed count up, clocks show the time; the
LTC card still counts frames. Feedback colours (running / warning near the
end / overrun / idle) are per-tile colour settings applied as custom
properties on the tile root, so they win over dashboard themes; left at
their defaults they follow the theme. Gear settings: Clock, ProPresenter
timers, LTC timecode, Module timers, Source headings, Status lines, the
clock's format / seconds / date; a "Timers ▾" header menu hides any single
timer (source:id, saved with the layout; the old hiddenItems and
timer:<uuid> / ltc picker variants keep working).
Manifest: 1.3.0, proddash >=1.4.0, provides timers, configGroups with a
toggle switch per integration (ProPresenter / LTC Timecode / PCO Plan /
Other modules) and group help; switch labels are nouns.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A new Display-group select (Default / Monospace) sets the font for the
timer and LTC digits. Monospace keeps the numbers from shifting sideways
as they change — easier to read on a fast-moving countdown or timecode.
Flows through server state → client applies a `tm-mono` class and re-fits
the digit sizing; both timer and LTC values (.tm-time) honor it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Simplify LTC to its one working source — the built-in audio listener — and
make the admin UI reflect it.
Module:
- Remove the stage-display websocket source (stage-ws.js, stagePassword)
and the /v1/timecode/status API probe — both dead on ProPresenter 21.4.
- Remove the remote-reader ingest (POST /ltc, ingestToken, tools/
ltc-reader.js): the module owns LTC end to end now. The decoder selftest
moves to modules/propresenter-timers/ltc.selftest.js so the engine stays
covered.
- composeLtc collapses to the listener: running/stopped/nosignal, or a
clear note when disabled / no device / capture failed / starting.
- Manifest: ltcEnabled is now a `switch`; ltcDevice and ltcChannel carry
showWhen:"ltcEnabled"; ProPresenter and LTC fields carry `group` labels.
Shell (admin) — backward-compatible additions, coordinate with the shell lane:
- New `switch` field type (boolean shown as the enable-toggle control).
- `group`: consecutive fields render under a labeled subsection.
- `showWhen: "<key>"`: a field is shown only while that boolean/switch is
on (and actually collapses — .field[hidden] override, since .field's
display:flex outranks the [hidden] UA default).
- applyConfigPatch coerces `switch` as boolean. Documented in MODULE-GUIDE.
Verified: engine selftest (29 checks); listener decodes BlackHole loopback
(running 30fps, ageMs); device picker lists inputs; POST /ltc now 404s;
admin shows two labeled groups, the switch, and device/channel appearing
only when the switch is on (computed display none↔flex confirmed).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The LTC card repainted only on server anchors (~4x/s), so the frame
counter jumped in ~7-frame steps. Now the client counts every frame
locally between anchors and re-syncs on each one — frame-accurate and
smooth, with no extra network traffic.
- Server anchors carry ageMs (how old the decoded timecode is) so clients
can pin the anchor to their own clock. ltc-listener reports it while
running; composeLtc passes it through (listener) or derives it (reader).
- Client does exact SMPTE frame<->timecode math (parseTc/tcToFrames/
framesToTc, incl. 29.97 drop-frame minute counting) and advances the
display in a requestAnimationFrame loop at the LTC's own rate.
- Robust when rAF is throttled (backgrounded tab): render() paints the
extrapolated frame at the 4x/s anchor rate too, so the display never
freezes — the rAF loop only refines it to every frame when visible.
- Anchor jitter can't tick the counter backwards (small regressions
clamped; genuine seeks/re-strikes pass); freshness cap stops freewheel
into phantom frames when anchors stop arriving.
Verified: SMPTE math against the encoder over 200k drop-frame frames plus
round-trips; the extrapolation pipeline simulated at 30/25/29.97DF showing
strict +1-per-frame advance and correct DF boundary crossing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The LTC listener now lives inside the module: it spawns the native
ltc-capture helper (moved into the module folder, compiled on first use,
exact-name device matching) for the admin-selected input device, extracts
the configured channel, and decodes SMPTE LTC in-process (ltc.js — the
engine, shared with tools/ltc-reader.js, which remains the remote-machine
option posting to /ltc).
Admin config: an "LTC listener" switch, an audio-device select populated
live from the new GET /ltc/devices route, and a 1-based channel number.
The switch off means LTC is gone entirely: no LTC entry in the Add-tile
picker, no LTC row in the Timers menu or All-timers grid, no stage/API
probes, and POST /ltc answers 409. Source precedence with it on:
listener-with-data, fresh remote reader, listener's own no-signal verdict,
then the legacy API/stage chain.
Shell (admin page): `select` fields learn `optionsRoute` — options fetched
from a module route at render, saved value kept selectable when the route
or device is gone. Documented in MODULE-GUIDE; backward compatible.
Coordinate with the shell lane before its next admin.js change.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ProPresenter 21.4 exposes no timecode through any API, so read the LTC
where it actually lives — the audio feed:
- tools/ltc-reader.js: zero-dependency SMPTE LTC decoder (biphase-mark,
adaptive bit clock, envelope-scaled comparator) fed s16le PCM on stdin
from ffmpeg/sox; POSTs running/stopped/nosignal + timecode + frame rate
(incl. 29.97 drop-frame) to the module. --selftest runs an encoder→
decoder suite (24/25/30 fps, DF minute counting, low level + noise + DC,
dropout recovery); --demo synthesizes live LTC through the real decoder
and ingest path with no audio hardware.
- Module: POST /ltc ingest route (optional bearer token, validated body,
6 s staleness with automatic fallback to the API probe / stage source),
richer LTC state (status, fps, df, reader source), health messages.
- Client: LTC card shows Running · <rate> / Stopped (held frame) /
No signal; works LTC-only with no ProPresenter host configured; the
reader-fed card no longer grays out when only ProPresenter is down.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Verified against ProPresenter 21.4: the legacy stage-display protocol
(ptl 610 — the only version PP21 accepts; newer values get 'out of
date') omits stage objects it predates, so a timecode field labeled LTC
never appears in any layout's frame list, and no timecode messages were
observed while idle. Fallback: an unknown uid streaming timecode-shaped
text (a fourth :FF group; not any configured timer's uuid) is bound as
LTC after two advancing samples, and that binding survives layout
refreshes. pp-timers-mock gains --ltc-unlisted to exercise the path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ProPresenter's HTTP API has no timecode route (verified: 21.4 returns
404), but its classic stage-display websocket still answers — so LTC now
comes from a stage layout field labeled "LTC": a zero-dependency RFC6455
client (stage-ws.js) authenticates (new stagePassword admin config),
resolves the LTC-labeled frame's uid from the layout list, and treats any
message carrying that uid as the timecode text. "Receiving" is a 2.5s
staleness heuristic; frozen or placeholder text reads as no-signal. The
HTTP probe stays authoritative when it ever answers (a 404 verdict is
retried once a minute), and the LTC card surfaces the reason when
timecode is unavailable (bad stage password, no LTC field). pp-timers-mock
grows a /stagedisplay websocket with --stage-pwd and --no-ltc-field to
exercise every path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New configSchema type 'endpoint' declared in the module spec: anything
that points at a device or service on the network must be one endpoint
field, rendered identically for every module in /admin as a joined
Host/IP : Port control and stored/handed to the module server as
{ host, port }. Migrates all three connection modules — ProdCom (was a
full URL field), ProPresenter and Timers (were separate host + port
fields). Legacy stored configs (prodcomUrl / flat host+port) keep
working until the admin form is re-saved, at which point the new shape
replaces them. MODULE-GUIDE documents the type and the presentation
rule: no split host/port fields, and full URLs only for genuine web
addresses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
Adopt main's new multi-tile contract: the module's server exports
tiles() (answered from the poller's held state, never a fresh upstream
request) listing All timers, one entry per discovered timer, and LTC
timecode. The client branches on moduleApi.variant — solo tiles render
exactly one card with no selection menu, and a solo timer that vanishes
from ProPresenter shows a labeled "Not in ProPresenter" card instead of
erroring (visible even in the compact layout). pp-timers-mock gains
--drop=<uuid,...> to simulate a timer deleted in ProPresenter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New propresenter-timers module: polls /v1/timers + /v1/timers/current
(shapes verified against openapi.propresenter.com), probes the
undocumented /v1/timecode/status for LTC and honestly reports
"not available on this ProPresenter" when absent. Per-tile timer/LTC
selection via a Timers ▾ header menu (never-seen timers default on),
responsive auto-sized cards with state-derived colors (the API exposes
no per-timer color), unmistakable overrun. Includes tools/pp-timers-mock.js
for developing without a real ProPresenter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
