A sound level meter that lives in ProdDash rather than beside it. Takes an
audio input the way the Timers module's LTC reader does, and offers four
tiles: the level as a big number, per-channel bars with peak hold, a
third-octave RTA, and a scrolling spectrogram.
The measurement happens in spl-capture.swift, not in Node and not in the
browser. LTC gets away with piping raw samples upstream because the decode
is cheap and single-channel; sound level is filtering and FFTs over every
channel at the device's rate, so the child does the work and only the
answers cross the pipe. That costs nothing in dependencies — Accelerate
ships with macOS, and the whole thing builds in two seconds with a plain
swiftc, exactly like ltc-capture.
The weighting filters are the part worth checking rather than trusting, so
`spl-capture --selftest` prints them against the IEC 61672 table. A- and
C-weighting land within 0.15 dB from 31.5 Hz to 4 kHz and exactly 0 dB at
1 kHz. The top octave is where the bilinear transform runs out of room: at
48 kHz the 16 kHz point sits about 3 dB low even with the pole pair
prewarped, and at 96 kHz that falls to 0.6 dB. It is a rounding error on a
broadband number and a real limit all the same, which is why the selftest
prints both rates instead of a pass mark.
Cross-checked against REW on the same microphone: after removing the fixed
calibration offset the two agree to a standard deviation of 0.5 dB on live
room noise.
Uncalibrated is a state the module says out loud — every tile reads dBFS
and labels it, so nobody mistakes a relative number for sound pressure. The
/measure route averages the calibrator tone in the power domain and hands
back the offset to paste into settings; a module cannot write its own admin
config, so that last step stays manual on purpose.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Installing is dragging ProdDash to Applications. The app carries the
dashboard and the Node that runs it, so nothing has to be installed first and
nothing can go missing underneath it.
ProdDash.app/Contents/
MacOS/ProdDash the launcher
Resources/node/bin/node Node 24.21.0 LTS, fetched and checksum-verified
Resources/app/ server.js, public/, modules/
Everything mutable stays where it already was, in ~/Library/Application
Support/ProdDash — and that now includes app/, the copy of ProdDash that
actually runs. The copy is not ceremony: ProdDash updates itself in place,
and nothing may write inside a signed .app. So the bundle holds a read-only
baseline and the data directory holds the running copy, which means both
routes to a new version keep working and don't fight — installing a newer
.app replaces the copy, while a copy that has already updated itself past the
bundle is left alone.
build.sh now assembles all of it: fetches Node against nodejs.org's published
checksums (cached in .cache/), embeds the server, compiles each module's
native helper so the Mac running ProdDash needs no compiler, signs nested
code before the bundle, and builds the disk image. --dev skips the payload
for launcher work, which still runs against a checkout.
Signing is set up for a Developer ID with the hardened runtime and
notarisation (--notarize), and falls back to ad-hoc when no such certificate
is installed. Entitlements are split by what each binary actually does: JIT
for node, audio input for the launcher and for module helpers that read one.
Built and run end to end: first-run install, bundled node, dashboard and
admin serving, re-seed in both directions (newer app replaces an older copy;
an updated copy survives), disk image mounts and its app verifies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A native Swift app (launcher/macos, ~2 MB, no dependencies) that starts,
stops and watches over the server from the menu bar — and holds the macOS
permissions its modules need.
The permissions are the point as much as the buttons are. macOS grants
privacy permissions to the application that owns a process, and a child
inherits its parent's identity, so with the server started from here node —
and the Timers module's ltc-capture — belong to this app bundle and the
microphone and local-network prompts are asked, and remembered, as ProdDash.
Started over SSH or from a launchd job there is nobody to ask: the permission
is silently absent rather than refused, which is the "endless zeroes" failure
ltc-listener.js warns about.
The shell was already built for a supervisor: with PRODDASH_LAUNCHER=1 it
exits 75 instead of respawning itself when the admin page applies an update,
which the launcher reads as a restart request rather than a fault. Crashes
get a backed-off restart (1s, 2s, 5s, 10s) and four in two minutes stops the
cycle. The server is spawned into its own process group, so stopping it also
stops anything it started — an orphaned ltc-capture would otherwise hold an
audio device indefinitely — and signals, a logout and Quit all stop it first.
- Menu bar: ProdDash's own 2x2 tile mark, its accent tile lit green while
serving, amber mid-move, red when something needs a person. Start, stop,
restart, open the dashboard or admin, open at login, quit.
- Window: status and both addresses, plus Log (also written to
~/Library/Logs/ProdDash, kept a week), Settings, and Permissions.
- The port is written to the data directory's proddash.json — ProdDash's own
file — so the port set here holds however it is next started. Something
already on the port is reported, and offered as a takeover when it answers
like a ProdDash started another way.
- Modules declare what they need in their manifests ("permissions": [...],
documented in docs/MODULE-GUIDE.md and ignored by the shell); the launcher
lists exactly that, with each module's reason, asks for the microphone,
and — since macOS reports nothing about local network access — offers a
check that browses for services and tries every configured upstream.
Timers, ProdCom and ProPresenter modules declare their permissions (patch
bumps). Build with launcher/macos/build.sh; output is gitignored.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The LTC listener now lives inside the module: it spawns the native
ltc-capture helper (moved into the module folder, compiled on first use,
exact-name device matching) for the admin-selected input device, extracts
the configured channel, and decodes SMPTE LTC in-process (ltc.js — the
engine, shared with tools/ltc-reader.js, which remains the remote-machine
option posting to /ltc).
Admin config: an "LTC listener" switch, an audio-device select populated
live from the new GET /ltc/devices route, and a 1-based channel number.
The switch off means LTC is gone entirely: no LTC entry in the Add-tile
picker, no LTC row in the Timers menu or All-timers grid, no stage/API
probes, and POST /ltc answers 409. Source precedence with it on:
listener-with-data, fresh remote reader, listener's own no-signal verdict,
then the legacy API/stage chain.
Shell (admin page): `select` fields learn `optionsRoute` — options fetched
from a module route at render, saved value kept selectable when the route
or device is gone. Documented in MODULE-GUIDE; backward compatible.
Coordinate with the shell lane before its next admin.js change.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Milestone 2. Server scans modules/*/module.json, serves module assets at
/modules/<id>/, mounts optional server routes (exact + trailing-/* prefix
patterns) under /api/modules/<id>/ with per-module config from
config/modules.json, and lists enabled manifests at GET /api/modules.
Shell dynamically imports each module's client.js and hands it the
moduleApi (config, instanceSettings, scoped fetch, auto-reconnecting sse,
setStatus). Clock module proves the contract end to end; password-typed
config fields never leave the server.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RNYUv9EyrGSFmCnmH7WYKH
