Status Indicators — Companion STATUS page for NA Ingest

One Companion page (page 19, "19 STATUS") that is solid green when everything is fine and blinks red with the actual problem ("HD2 NO DISK", "LIGHT PC MIDI LOST") when something needs attention.

There are two parts:

• status_panel.py — a watchdog that runs on NA Ingest as the LaunchAgent org.waterschurch.status-panel. Every second it reads Companion's connection statuses and module variables. It also checks what Companion can't see: network MIDI peers, Bonjour MIDI sessions, pings, launchd services, disk space, and whether the Resi cloud is reachable. It writes the result into one Companion custom variable.
• status-page.companionconfig — the page. Every button just draws what the watchdog wrote and blinks on your existing flash_tick trigger.

Layout (Stream Deck XL; MK.2 and Mini show the top-left corner)

	col 1	col 2	col 3	col 4	col 5	col 6	col 7
row 0	ALL	REC	AUDIO	RF	SHOW	VIDEO	STREAM
row 1	HD1	HD2	HD3	HD4	HD5	HD6	TASCAM
row 2	X32	DANTE	TRACKS	LIGHT PC	RACK (SuperRack)	BIBLE TV	PROP (ProPresenter)
row 3	ATEM	OBS	RESI	NET	INGEST	LED	ARENA

Column 0 holds page up / page number / page down, plus SERVICE at row 3.

Row 0 holds the group tiles. Each one shows the first problem in its group, plus "+N" if there are more. RF covers all six Shure units: AD4Q ×2, ULXD4, and PSM1000 ×3.

Colours

Tile	Meaning
Green	OK. The second line shows something useful, like 28h of record time or 10/10 Dante devices.
Blinking red	Show-stopping, during service mode.
Solid dark red	Acknowledged. It stays red until the problem clears, then goes green. A new failure blinks again.
Amber	Warning: low disk, battery at 2 bars, RF interference, a device that keeps dropping out ("WING GONE x3"), a network blip in the last 3 minutes ("BLIP 10:21").
Dim red, not blinking	A fault outside service mode.
Grey	Expected off outside service: OBS, a HyperDeck with no disk, Bible TV.
Purple	The watchdog has stopped. The master shows WATCHDOG DOWN and Companion's own error count.

Buttons

• Press any tile: acknowledge its alarms (stops the blinking). Press ALL to acknowledge everything.
• Hold a device tile for 2 seconds: restart that tile's Companion connection. This is the fix for a connection stuck after a network blip. It only restarts Companion's side and never reboots the device.
• SERVICE: service mode turns on automatically Sunday 07:00–12:30 (service_windows in config.json). Press SERVICE to switch it on or off by hand, for example for a Wednesday event. The manual setting lasts until the next scheduled start or end.

What each tile checks

Tile	Checks
HD1–HD6	Companion connection; NO DISK; record time LOW (<30 min, amber) / FULL (<5 min); NOT REC when another deck is recording and this one isn't
	HD2 and HD4 are "optional": true in config.json: with no disk they sit grey with no alarm, and once a disk is in they are watched like the others. Add or remove "optional": true on any deck to change that.
TASCAM	connection; the recorder's own Error / Caution
X32, ATEM, ARENA, LED, OBS	Companion connection
DANTE	10 key devices present (DiGiCo DMIs, WING, DQ rack, AD4Qs, Studio A X32 / Resi AJA / Ingest, Translation)
TRACKS	NA-Tracks Dante device; tracks Mac pings; "NA Tracks" MIDI session still on the network; Ableton OSC connection
LIGHT PC	Lighting PC still joined to NA Ingest's network MIDI session; its MIDI session still on the network
RACK	SuperRack-LiveBox still joined to the MIDI session; its Dante device
BIBLE TV	TV pings; OSC connection
PROP	ProPresenter API; NA-ProPresenter-Mac Dante device
RESI	decoder (RossTalk); resi-studio-cues; Resi cloud reachable
NET	NA Ingest's link; gateway 10.1.0.1 pings; 4+ connections from 3+ groups dropping within 10 s (what happened Sunday 10/5 at 10:21)
INGEST	Resi bridge and lobby captions services running; ProdDash running; free disk
RF (group)	Shure connections; battery ≤1 bar red, 2 bars amber; RF interference (only while that transmitter is on); PSM RF muted

A problem has to last 3 seconds before it shows, so one bad reading doesn't trigger an alarm. Recovery shows immediately.

One-time Companion setup

1. Variables → Custom Variables: add three variables. Leave the start values empty and "persist" off:
   • sp_state
   • sp_hb
   • sp_cmd
2. Import / Export → Import: choose status-page.companionconfig (it's on NA Ingest's Desktop) and import it into page 19. Page 19 is empty today.
3. Make sure the flash_tick_500 trigger stays enabled. It's the blink clock.

Changing things

This folder is the source of truth. Edit config.json here, then copy the folder to NA Ingest:

scp status_panel.py coremidi.py config.json install.sh checklist-ingest:status-panel-install/

Then run the installer there. It backs up the old config and restarts the watchdog:

ssh checklist-ingest 'zsh ~/status-panel-install/install.sh'

If you add or move tiles, also rebuild the page and import it into page 19 again:

python3 make_page.py

Other commands:

python3 status_panel.py --once          # poll once and print every tile; writes nothing
python3 -m unittest discover -s tests   # offline tests, no Companion or gear needed
zsh install.sh --remove                 # stop the watchdog

The log is ~/Library/Logs/status-panel.log on NA Ingest. Every fault and clear is written there with a timestamp, which is handy for a post-service review.

Optional: see what the tracks send to the lights

The TRACKS tile can show when the tracks rig last sent MIDI ("TRK MIDI 3s"). For that, NA Ingest has to listen to the "NA Tracks" session. Use a separate session so nothing Companion sends can reach Ableton:

1. On NA Ingest, open Audio MIDI Setup → Window → Show MIDI Studio → Network (the globe icon).
2. Under My Sessions, press +, rename the new session to NA Ingest Listen, and tick it to enable it.
3. With NA Ingest Listen selected, choose NA Tracks in the Directory and press Connect.

The watchdog picks it up within about 10 seconds. Until then that line just stays hidden.

The LIGHT PC tile can do the same in the other direction. If the lighting software can send a heartbeat note back to NA Ingest every few seconds, set "max_silence_seconds": 10 on the LIGHT PC midi_rx check. The tile then goes amber if the lighting PC stops answering during service.

Files

File	Purpose
status_panel.py	the watchdog
coremidi.py	reads network MIDI sessions and listens to MIDI sources (ctypes, no extra installs)
config.json	tiles, positions, checks, service windows
make_page.py	builds status-page.companionconfig from config.json
install.sh	installs or updates the LaunchAgent on NA Ingest
tests/	offline tests, including a fake Companion and a MIDI loopback