On a domain, show the code and nothing else

Build 123. 122 taught the banner and the QR about the public address but left
the interface picker underneath them untouched, so the panel still listed
10.6.5.55 and 10.1.7.39 with one marked IN USE — numbers that no longer point
anywhere anybody is being sent, directly under a banner naming the domain.

Those rows exist to choose which interface the code encodes, which is a
question only a LAN setup has: with a public address set the code points at the
domain whichever row is picked. They are hidden now, and a LAN-only campus is
unaffected.

Printable poster is replaced by Save QR image. The poster people actually print
is made in their own design tool, and what they need from the app is the code
as a file — a 512px SVG, so it scales to any size without going soft. The
built-in poster page is untouched at /poster for anyone who wants it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

app/engine.js

@@ -190,7 +190,9 @@ const state = {
 
   /* health counters, reported to the operator page */
   degradedFinals: 0,         // finals that shipped with fewer languages (stale)
-  captionOnlyFinals: 0       // finals that shipped with no translations at all
+  captionOnlyFinals: 0,      // finals that shipped with no translations at all
+  captionOnlyAt: 0,          // when the last one happened
+  degradedAt: 0
 };
 
 // ────────────────────────────────────────────────────────── logging
@@ -891,12 +893,54 @@ async function respawnWorker(worker) {
         log('the speech model is too heavy for this machine — switching to ' +
             lighter.split('/').pop(), 'err');
       }
+      /*
+       * A LIGHTER MODEL GETS THE PREVIEW'S DTYPE, NOT THE BIG ONE'S.
+       *
+       * asrDtype is chosen for the accurate model and its weights are cached against
+       * it. Reusing it when stepping down asks for a variant that was never
+       * downloaded — and those weights live in the browser cache, with no network at
+       * a venue — so the step-down failed and the ladder could not move at all.
+       *
+       * MEASURED on a campus Mac: the cache held whisper-large-v3-turbo as
+       * encoder_model_q4f16.onnx (its asrDtype) and whisper-small as
+       * encoder_model_fp16.onnx (the preview's). Stepping down asked for
+       * whisper-small at q4f16, a file that is not there; it went to the network,
+       * failed, and logged "Unsupported model type: whisper" three times a minute
+       * for ever while the service sat dead.
+       *
+       * The preview runs whisper-small on exactly these settings every service, so
+       * they are the one combination this machine is known to be able to load.
+       */
+      const stepDtype = lighter
+        ? resolveDtype(cfg.asrFastDtype, { encoder_model: 'fp16', decoder_model_merged: 'q4' })
+        : resolveDtype(cfg.asrDtype, { encoder_model: 'fp16', decoder_model_merged: 'q4' });
       state.asrWorker = await loadWorkerWithFallback('speech', 'automatic-speech-recognition',
         state.asrModelInUse || cfg.asrModel,
-        resolveDtype(cfg.asrDtype, { encoder_model: 'fp16', decoder_model_merged: 'q4' }),
+        stepDtype,
         { encoder_model: 'q4', decoder_model_merged: 'q4' });
       log('speech model restarted' + (lighter ? ' on ' + lighter.split('/').pop() : ''), 'ok');
       state.slowRun = 0;
+      if (lighter) {
+        /*
+         * THROW AWAY THE BACKLOG THAT CAUSED THIS, AND LET THE NEW MODEL SETTLE.
+         *
+         * Swapping the model does nothing about the queue that triggered the swap.
+         * Those chunks are already past the caption-only cutoff, so they can no
+         * longer be translated in time and are worth nothing to the room — but the
+         * first of them gets handed to a model that has just loaded, takes the full
+         * worker timeout, and trips the absolute rule. MEASURED: a campus Mac fell
+         * large-v3-turbo -> small -> base in 34 seconds exactly that way, landing on
+         * a model SLOWER than the one it started from.
+         *
+         * So drop them, and refuse to step down again for a grace window, so the new
+         * model is judged on sentences it was actually given.
+         */
+        const dropped = queue.length;
+        queue.length = 0;
+        state.steppedDownAt = Date.now();
+        if (dropped) log('dropped ' + dropped + ' stale sentence' + (dropped === 1 ? '' : 's') +
+                         ' the old model never reached', 'warn');
+      }
     }
   } catch (err) {
     log('model restart failed: ' + err.message, 'err');
@@ -1849,15 +1893,33 @@ async function pump() {
       const sentences = collapseLoops(splitSentences(text));
 
       let targets = orderedTargets();
-      if (ageSec > 12) {
+      /*
+       * SKIPPING A TRANSLATION ONLY BUYS SOMETHING IF THERE IS A QUEUE TO DRAIN.
+       *
+       * Dropping the translations of stale audio is how the app catches up: the
+       * listener has moved on, so the work is wasted and the time is better spent on
+       * the sentences behind it. That reasoning needs a backlog. With nothing waiting
+       * behind it, skipping costs the room a sentence and saves nothing at all.
+       *
+       * MEASURED: a campus Mac took one 16 s stall — two Screen Sharing sessions
+       * competing for the machine — and skipped that sentence's translations with an
+       * EMPTY queue. The room lost a line of the sermon to a catch-up that had
+       * nothing to catch up on.
+       */
+      if (ageSec > 12 && queue.length > 0) {
         targets = [];
         state.captionOnlyFinals++;
-        log('audio ' + ageSec.toFixed(0) + 's stale — caption only, translations skipped', 'err');
+        state.captionOnlyAt = Date.now();
+        log('audio ' + ageSec.toFixed(0) + 's stale with ' + queue.length + ' waiting — ' +
+            'caption only, translations skipped', 'err');
+      } else if (ageSec > 12) {
+        /* Late, but nothing is behind it: say so, and translate it anyway. */
+        log('audio ' + ageSec.toFixed(0) + 's late, but nothing is queued — translating it anyway', 'warn');
       } else if (ageSec > 6) {
         const listening = new Set((state.byLanguage || []).map((r) => r.lang));
         const before = targets.length;
         targets = targets.filter((t) => listening.has(t));
-        if (targets.length < before) state.degradedFinals++;
+        if (targets.length < before) { state.degradedFinals++; state.degradedAt = Date.now(); }
       }
 
       /* The segment's own loudness, measured once and shared by every sentence
@@ -1931,23 +1993,36 @@ async function pump() {
      * drains does not recover on its own.
      */
     /*
-     * 0.85 and a backlog of five, both measured rather than chosen.
+     * SLOWER THAN THE AUDIO IT COVERS, AND LANDING LATE.
      *
-     * The Mini's sentences ran 4.4 s against 4.5 s of audio — nominally FASTER
-     * than real time, while the queue sat at 46 and the lag climbed past 150 s.
-     * Per-sentence time alone therefore misses it: the work outside this timer
-     * (segmenting, the preview model sharing the GPU, the scheduler) is enough
-     * to lose on its own. The margin catches "near enough to real time to be
-     * losing"; the queue depth is the proof that it actually is, and keeps one
-     * slow sentence on a healthy machine from touching anything.
+     * This used to fire only past 8 s, on the reasoning that 8 s meant slower
+     * than people talk. That held when a chunk could be 8 s long; chunks are
+     * capped at HARD_CUT_MAX, 5.5 s, so a 4.4 s sentence is already losing and
+     * never came near the old threshold.
+     *
+     * Both numbers below were measured on a campus M4 Pro, and the second one
+     * only after a first attempt got it wrong. 0.85, because that Mac ran 4.4 s
+     * against 4.5 s of audio — nominally FASTER than real time while losing
+     * badly, since the work outside this timer (segmenting, the preview model
+     * sharing the GPU, the scheduler) loses on its own.
+     *
+     * The second test was a queue depth, and watching that Mac go red disproved
+     * it: the queue sat at 2-3 while the lag held at 15 s and the verdict was
+     * already red. A machine can be persistently late without ever stacking work
+     * up — it finishes each sentence just slightly too slowly, for ever. So the
+     * test is how far behind the speaker the sentence actually landed, which is
+     * what the operator is complaining about in the first place.
      */
-    const losingGround = jobAudioMs > 0 && took > jobAudioMs * 0.85 && queue.length >= 5;
-    if (took > 8000 || losingGround) {
+    /* A model that loaded seconds ago has not had a fair sentence yet. */
+    const settling = state.steppedDownAt && (Date.now() - state.steppedDownAt) < STEP_SETTLE_MS;
+    const behindMs = Date.now() - job.at;
+    const losingGround = jobAudioMs > 0 && took > jobAudioMs * 0.85 && behindMs > 8000;
+    if (!settling && (took > 8000 || losingGround)) {
       state.slowRun = (state.slowRun || 0) + 1;
       if (state.slowRun >= 3 && !respawning && lighterAsr(state.asrModelInUse || state.cfg.asrModel)) {
         state.slowRun = 0;
         log('transcription is slower than people are speaking (' + took + ' ms for ' +
-            Math.round(jobAudioMs) + ' ms of audio, ' + queue.length + ' waiting) — ' +
+            Math.round(jobAudioMs) + ' ms of audio, ' + Math.round(behindMs / 1000) + 's behind) — ' +
             'stepping down to a lighter model', 'err');
         respawnWorker(state.asrWorker);
       }
@@ -2459,6 +2534,11 @@ function monitorTranslation(cid, lang, text) {
  * It says it once per episode, and names both numbers so the operator can act
  * on it rather than go looking.
  */
+/* How long a freshly swapped speech model is left alone. Long enough to cover a
+   cold first inference, short enough that a genuinely hopeless model still falls
+   through the ladder within a sentence or two. */
+const STEP_SETTLE_MS = 20000;
+
 const DEAF_AFTER_MS = 90000;
 setInterval(() => {
   try {
@@ -2698,6 +2778,7 @@ function goLive(on) {
   state.live = on;
   if (on) {
     state.degradedFinals = 0; state.captionOnlyFinals = 0; state.fragmentFinals = 0;
+    state.captionOnlyAt = 0; state.degradedAt = 0;
     /* The watchdog measures from the start of the service, not from the last
        sentence of the previous one. */
     state.lastFinalAt = Date.now();
@@ -2772,6 +2853,10 @@ function reportStatus() {
       queue: queue.length,
       degradedFinals: state.degradedFinals,
       captionOnlyFinals: state.captionOnlyFinals,
+      /* WHEN, not just how many — the verdict needs to know whether this is
+         happening now or happened once an hour ago. */
+      captionOnlyAt: state.captionOnlyAt || 0,
+      degradedAt: state.degradedAt || 0,
       fragmentFinals: state.fragmentFinals || 0,
       cloud: state.cloudStats || null
     }
@@ -3423,14 +3508,50 @@ function shareChoice() {
   };
 }
 
-function shareBase() {
+/* This Mac on the church network. The operator page lives here and NOWHERE
+   else: it returns 404 to anything arriving through a proxy, by design. */
+function lanBase() {
   const c = shareChoice();
   if (!c || c.none) return '';
   return 'http://' + c.addr.address + ':' + state.local.port;
 }
 
+/*
+ * WHAT THE CONGREGATION OPENS.
+ *
+ * A church that has put this on a domain has said so in the operator page's
+ * Public address, and from that moment the LAN address is the wrong thing to
+ * print: it is not what is on the poster, not what the QR should encode, and
+ * not what someone off the building's wifi can reach. The app window went on
+ * showing the IP anyway, because this half of it never read that setting --
+ * the operator page honoured it and the main window did not, so the two
+ * disagreed about the one fact they both exist to display.
+ */
+function publicBaseConfigured() {
+  const u = opConfig && typeof opConfig.publicUrl === 'string' ? opConfig.publicUrl.trim() : '';
+  return u ? u.replace(/\/+$/, '') : '';
+}
+
+function shareBase() {
+  return publicBaseConfigured() || lanBase();
+}
+
 function renderQrWarning() {
   const el = $('qrWarn');
+  /*
+   * On a domain the warnings below are about an address nobody is being
+   * given any more. Saying "Wi-Fi is down, phones cannot reach the code"
+   * while the code points at a proxy would send the desk after the wrong
+   * thing entirely.
+   */
+  const pub = publicBaseConfigured();
+  if (pub) {
+    el.hidden = false;
+    el.textContent = 'The code points at ' + pub + ', set as the public address. ' +
+      'This Mac still has to be reachable from there; its own address is ' +
+      (lanBase() || 'unavailable') + '.';
+    return;
+  }
   const c = shareChoice();
   if (!c) { el.hidden = true; return; }
 
@@ -3481,6 +3602,26 @@ function renderShare() {
   const list = state.local.addresses || [];
   const box = $('addrList');
   box.textContent = '';
+  /*
+   * WHICH INTERFACE THE QR USES IS A QUESTION ONLY A LAN SETUP HAS.
+   *
+   * These rows let the operator pick the address the code points at. Once a
+   * public address is configured the code points at the domain whatever they
+   * pick, so the list is a row of numbers that do nothing — and the one
+   * marked IN USE is not the address anyone is being given. Hide it.
+   */
+  const addrBox = $('addrList');
+  addrBox.hidden = !!publicBaseConfigured();
+  if (addrBox.hidden) {
+    /* Still draw the code itself — it is the only thing left in this panel. */
+    const only = shareBase();
+    $('qr').src = only
+      ? 'http://127.0.0.1:' + state.local.port + '/qr.svg?url=' + encodeURIComponent(only + '/')
+      : '';
+    renderQrWarning();
+    renderOperatorUrl();
+    return;
+  }
 
   /* Mark the row the QR is actually using, not the row that was saved — when
      a lease moves those are two different things and the saved one is gone. */
@@ -3522,8 +3663,22 @@ $('copyAddr').addEventListener('click', () => {
     .catch((err) => log('could not copy: ' + err.message, 'err'));
 });
 
-$('openPoster').addEventListener('click', () => {
-  window.open('http://127.0.0.1:' + state.local.port + '/poster', '_blank');
+/*
+ * The QR itself, saved as a file, because the poster people actually print
+ * is made in their own design tool. The built-in poster page is still there
+ * at /poster for anyone who wants it; it is just not what this button does.
+ */
+$('saveQr').addEventListener('click', () => {
+  const base = shareBase();
+  if (!base) { log('no address to encode yet', 'err'); return; }
+  const a = document.createElement('a');
+  a.href = 'http://127.0.0.1:' + state.local.port + '/qr.svg?url=' +
+           encodeURIComponent(base + '/');
+  a.download = 'church-translate-qr.svg';
+  document.body.appendChild(a);
+  a.click();
+  a.remove();
+  log('saved the QR for ' + base + '/', 'ok');
 });
 $('openOperator').addEventListener('click', () => {
   window.open('http://127.0.0.1:' + state.local.port + '/operator', '_blank');
@@ -3580,7 +3735,8 @@ function renderBuildTag() {
 }
 
 function renderOperatorUrl() {
-  const base = shareBase();
+  /* Deliberately lanBase, not shareBase: over a proxy /operator is a 404. */
+  const base = lanBase();
   $('opPageUrl').textContent = base ? base + '/operator' : 'no network';
 }
 
@@ -3883,6 +4039,7 @@ async function loadOperator() {
   try {
     const j = await opApi('/api/config');
     opConfig = j.config;
+    renderShare();   /* publicUrl may have just arrived */
     clearTimeout(opLoadTimer); opLoadTimer = null;   // it answered; stop retrying
     opRetryMs = 0;
     renderOpLanguages();
@@ -3937,6 +4094,7 @@ async function opSave(patch, okMsg) {
   try {
     const j = await opApi('/api/config', { method: 'POST', body: JSON.stringify(patch) });
     opConfig = j.config;
+    renderShare();   /* publicUrl may have just arrived */
     if (okMsg) log(okMsg, 'ok');
     return j;
   } catch (e) { log('could not save: ' + e.message, 'err'); throw e; }

app/index.html

@@ -433,7 +433,7 @@
       <div id="addrList" class="addrlist"></div>
       <div class="railbtns">
         <button class="btn btn-primary" id="copyAddr">Copy address</button>
-        <button class="btn" id="openPoster">Printable poster</button>
+        <button class="btn" id="saveQr">Save QR image</button>
       </div>
 
       <h3 class="subhead">Operator page</h3>

app/package.json

@@ -2,7 +2,7 @@
   "name": "church-translate-engine",
   "productName": "Church Translate",
   "version": "3.23.2",
-  "buildNumber": 117,
+  "buildNumber": 123,
   "private": true,
   "description": "Live sermon translation — self-contained: captures audio, transcribes, translates, and serves the congregation page itself",
   "main": "main.js",
@@ -106,7 +106,7 @@
       ]
     },
     "asar": false,
-    "buildVersion": "117",
+    "buildVersion": "123",
     "win": {
       "target": [
         {

app/server/server.js

@@ -510,6 +510,11 @@ const ENGINE_STALE_MS = 12000;
  * A campus reported "constantly behind, in the red" and the cause took an
  * afternoon to find; it was eight languages on hardware tuned against one.
  */
+/* How long a stumble keeps colouring the verdict. Long enough that a real
+   problem stays visible while someone walks to the desk, short enough that a
+   one-off does not outlive the sentence after it. */
+const TROUBLE_WINDOW_MS = 120000;
+
 function loadNote() {
   const n = activeLanguages().length;
   if (n < 2) return '';
@@ -523,10 +528,27 @@ function healthVerdict(connected, stale) {
   if (stale)                    return { level: 'red',   detail: 'The translation app has stopped responding.' };
   if (!state.live)              return { level: 'green', detail: 'Ready.' };
   if (!es.modelsReady)          return { level: 'amber', detail: 'Models are still loading.' };
-  if ((es.lagMs || 0) > 12000 || (es.captionOnlyFinals || 0) > 0)
+  /*
+   * RECENTLY, not ever.
+   *
+   * captionOnlyFinals is a running total for the whole service, and testing it
+   * for "more than zero" meant a single stale sentence pinned the desk's light
+   * red until the next restart. MEASURED: a campus Mac took one 16 s stall at
+   * 14:25 — caused by two Screen Sharing sessions competing for the machine —
+   * recovered immediately to a 421 ms lag with an empty queue, and still showed
+   * red half an hour later. An operator who looks up and sees red wants to know
+   * what is wrong NOW; a light that cannot go back to green teaches them to
+   * ignore it.
+   *
+   * So the totals still travel, for the record and for the operator page, but
+   * the verdict asks when it last happened.
+   */
+  const recentCaptionOnly = es.captionOnlyAt && (Date.now() - es.captionOnlyAt) < TROUBLE_WINDOW_MS;
+  if ((es.lagMs || 0) > 12000 || recentCaptionOnly)
     return { level: 'red',
              detail: 'Falling badly behind — some sentences are captions only.' + loadNote() };
-  if ((es.lagMs || 0) > 6000 || (es.queue || 0) >= 2 || (es.degradedFinals || 0) > 0)
+  const recentDegraded = es.degradedAt && (Date.now() - es.degradedAt) < TROUBLE_WINDOW_MS;
+  if ((es.lagMs || 0) > 6000 || (es.queue || 0) >= 2 || recentDegraded)
     return { level: 'amber',
              detail: 'Running behind — idle languages may be trimmed to catch up.' + loadNote() };
   if (es.cloud && es.cloud.parked)

docs/PUBLIC-ACCESS.md

@@ -57,16 +57,45 @@ For a second campus, repeat with its own name — `translate-north`,
 
 ---
 
-## The other way: your existing nginx proxy
+## The other way: a name on your existing reverse proxy
 
-You already run a reverse proxy at `10.1.1.4` fronting `check.watersmedia.org`,
-with split-horizon DNS. It can front this too, though it means the traffic goes
-through the NAS network to reach the booth Mac.
+You already run a reverse proxy on the NAS at `10.1.1.4` (Boba-Fett, Synology
+DSM) fronting `check.watersmedia.org`. It can front this too, though it means
+the traffic goes through the NAS network to reach the booth Mac.
 
-Add a DNS record for `translate.watersmedia.org` — public to your WAN address,
-internal to `10.1.1.4` — and a server block. Copy the one that already serves
-the checklist app, change the name, and point it at the **booth Mac**, not the
-NAS:
+This is what North Attleboro runs as of 2026-10-15, in the **LAN-only** form:
+`http://translate.watersmedia.org` works on the building's WiFi at both the
+Apollo Beach and North Attleboro sites and nowhere else. Nothing was opened to
+the WAN. The pieces, with the exact scripts and a step-by-step runbook under
+[`examples/waters-church-na/`](examples/waters-church-na/README.md):
+
+| Piece | Where | What |
+| --- | --- | --- |
+| Local DNS | UniFi consoles at AB and NA (Settings → Policy Table → DNS) | A record `translate.watersmedia.org` → `10.1.1.4`, TTL 300, created with `unifi-dns-record.py` and a per-console Network API key |
+| Proxy rule | DSM → Control Panel → Login Portal → Advanced → Reverse Proxy | HTTP `translate.watersmedia.org:80` → HTTP `10.1.7.39:3100`, WebSocket headers, `X-Forwarded-Host: $http_host`, read timeout 3600 s |
+| HTTPS | `/usr/local/etc/nginx/sites-enabled/translate-redirect.conf` on the NAS | `https://` answers a 301 to `http://`; the name has no certificate, so browsers warn before the redirect |
+
+Both NAS pieces come from `boba-fett-translate-proxy.sh`, run as
+`ssh -t boba-fett sudo bash translate-proxy.sh` because DSM's reverse-proxy API
+is root-only. Going through DSM rather than a hand-edited nginx file means the
+rule shows up in the DSM UI and survives DSM updates. DSM adds `Host`,
+`X-Real-IP`, `X-Forwarded-For` and `X-Forwarded-Proto` on its own.
+
+Then: Operator page → **Public address** → `http://translate.watersmedia.org`
+(no trailing slash), so the QR code and poster use the name instead of the
+IP and port.
+
+To let people off-site use the same name later: add a public DNS record for
+`translate.watersmedia.org` pointing at the NA WAN address, get a certificate
+in DSM (Control Panel → Security → Certificate → Let's Encrypt), replace the
+redirect with an HTTPS rule to the same destination, and switch Public address
+to `https://`. The app behaves the same either way, including the `/operator`
+404 through a proxy.
+
+### If the proxy is plain nginx instead of DSM
+
+DSM writes most of this for you. On a hand-managed nginx the server block
+needs all of it:
 
 ```nginx
 server {
@@ -77,7 +106,7 @@ server {
     ssl_certificate_key /path/to/privkey.pem;
 
     location / {
-        proxy_pass http://10.6.3.222:3100;      # the booth Mac
+        proxy_pass http://10.1.7.39:3100;      # the booth Mac
 
         proxy_set_header Host              $host;
         proxy_set_header X-Real-IP         $remote_addr;
@@ -95,21 +124,36 @@ server {
         # the room reconnects at once.
         proxy_read_timeout  3600s;
         proxy_send_timeout  3600s;
+
+        # Live audio: do not hold HLS segments back.
+        proxy_buffering off;
     }
 }
 ```
 
-This has one real drawback the tunnel does not: the booth Mac needs a fixed
-address on the network, or the proxy breaks the next time DHCP moves it.
+Either way the booth Mac needs a fixed address or a DHCP reservation, or the
+proxy breaks the next time DHCP moves it.
 
 ---
 
 ## Checking it worked
 
 ```bash
-curl -s https://translate.watersmedia.org/healthz
+curl -s http://translate.watersmedia.org/healthz      # https:// once published
 ```
 
-Should return `{"ok":true,…}`. Then open the page on a phone **with WiFi turned
-off** — that is the real test. If the page loads but captions never appear, the
-WebSocket headers are missing.
+Should return `{"ok":true,…}`, the same as `curl -s http://10.1.7.39:3100/healthz`.
+A proxy that passes the WebSocket answers `HTTP/1.1 101 Switching Protocols` to:
+
+```bash
+curl -si -N -H 'Connection: Upgrade' -H 'Upgrade: websocket' \
+  -H 'Sec-WebSocket-Version: 13' -H 'Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ==' \
+  http://translate.watersmedia.org/ws | head -1
+```
+
+Then open the page on a phone: for the LAN-only setup on the guest WiFi, for a
+published one **with WiFi turned off**. That is the real test. If the page loads
+but captions never appear, the WebSocket headers are missing. If phones on
+guest WiFi cannot connect at all, look at client isolation on that network
+before anything else. `/operator` returning 404 through the proxy is by design;
+staff use `http://10.1.7.39:3100/operator` on the LAN.

docs/examples/waters-church-na/README.md

@@ -0,0 +1,93 @@
+# translate.watersmedia.org — local DNS and reverse proxy
+
+Puts the Church Translate congregation page on a church hostname inside the
+Apollo Beach and North Attleboro networks. LAN only, plain HTTP, no WAN access.
+The app's own requirements are in [PUBLIC-ACCESS.md](../../PUBLIC-ACCESS.md). This
+was done on 2026-10-15 against app 3.23.2 build 121.
+
+| What | Value |
+| --- | --- |
+| App host | Translate Mac, North Attleboro LAN `10.1.7.39` |
+| App port | TCP 3100, plain HTTP + WebSocket on `/ws` (the only port to expose) |
+| Reverse proxy | Boba-Fett (Synology DSM 7.0.1), `10.1.1.4`, `ssh boba-fett` (port 202, user Michael) |
+| Hostname | `translate.watersmedia.org` |
+| Local DNS | A record on the AB and NA UDM Pro consoles → `10.1.1.4`, TTL 300 |
+| HTTPS | no certificate; `https://translate.watersmedia.org` answers 301 to `http://` |
+
+`curl -s http://10.1.7.39:3100/healthz` should return `{"ok":true,"live":true,...}`
+before anything below is tested.
+
+## 1. Local DNS on UniFi (AB and NA) — done 2026-10-15
+
+Each console has its own Network API key saved as
+`~/.config/unifi/<site>-network-api-key` (created in Settings → Control Plane →
+Integrations → Create API Key; all five sites are saved on Michael's Mac). The
+record was created with:
+
+```bash
+python3 docs/examples/waters-church-na/unifi-dns-record.py translate.watersmedia.org 10.1.1.4 --sites apollo-beach,north-attleboro
+```
+
+Resulting policy ids: AB `379f868d-a956-4ec1-acef-13557153ff3f`, NA
+`16bf7109-ec68-41f9-9c16-fa6a62471430`. Both gateways answer `10.1.1.4`.
+`--list` shows every DNS policy per console; `--dry-run` previews.
+
+Why Boba-Fett and not the Mac: the proxy owns the hostname so the port never
+appears in the URL, and AB clients reach `10.1.1.4` over the site-to-site link
+exactly as they already do for `chronicles-na.waterschurch.org`.
+
+## 2. Reverse proxy on Boba-Fett — done 2026-10-15
+
+[boba-fett-translate-proxy.sh](boba-fett-translate-proxy.sh) does the whole
+job and is idempotent. It was run on 2026-10-15; afterwards `/healthz`,
+`/api/languages`, the `/ws` upgrade (101) and the HTTPS 301 all checked out
+from both the AB and NA LANs, and `/operator` returned 404 as designed. A copy lives at `~/translate-proxy.sh` on Boba-Fett
+(Michael's home). DSM's reverse-proxy API and nginx reload both need root, and
+sudo there asks for Michael's password, so run it interactively:
+
+```bash
+ssh -t boba-fett sudo bash translate-proxy.sh
+```
+
+What it creates:
+
+| Piece | Where | Content |
+| --- | --- | --- |
+| DSM reverse proxy rule | Control Panel → Login Portal → Advanced → Reverse Proxy, "translate.watersmedia.org" | HTTP `translate.watersmedia.org:80` → HTTP `10.1.7.39:3100`; custom headers `Upgrade: $http_upgrade`, `Connection: $connection_upgrade` (WebSocket), `X-Forwarded-Host: $http_host`; read timeout 3600 s; HTTP/1.1 |
+| HTTPS redirect | `/usr/local/etc/nginx/sites-enabled/translate-redirect.conf` | `server { listen 443 ssl; server_name translate.watersmedia.org; return 301 http://translate.watersmedia.org$request_uri; }` |
+
+DSM already sends `Host`, `X-Real-IP`, `X-Forwarded-For` and
+`X-Forwarded-Proto` on every rule. The whole host lands on `/`, which the app
+requires. `/operator` returning 404 through the proxy is intended; staff use
+`http://10.1.7.39:3100/operator` on the LAN.
+
+To undo: delete the rule in the DSM Reverse Proxy list, remove the redirect
+file, and `sudo synosystemctl reload nginx`.
+
+Known limits:
+
+- The HTTPS redirect only runs after a TLS handshake with Boba-Fett's default
+  certificate, so a browser shows a certificate warning first. A trusted
+  certificate for this name would need DNS-01 validation against the
+  watersmedia.org zone (cPanel), which is not set up.
+- DSM's reverse proxy cannot turn `proxy_buffering` off. HLS segments under
+  `/live/` are small discrete files and the WebSocket is a tunnel after upgrade,
+  so the effect is minor; if audio lag is reported, that is the first thing to
+  revisit with a hand-written nginx include.
+
+## 3. After the proxy answers
+
+1. On the NA LAN open `http://10.1.7.39:3100/operator`, enter the operator PIN,
+   and set **Public address** to `http://translate.watersmedia.org` (no trailing
+   slash). Otherwise the QR code and poster keep advertising `10.1.7.39:3100`.
+2. Verify from a machine at AB and one at NA:
+
+```bash
+curl -s http://translate.watersmedia.org/healthz
+```
+
+   It must return the same JSON as the direct `10.1.7.39:3100` check.
+3. Open the page on a phone on guest wifi and confirm captions appear
+   (WebSocket) and spoken audio plays (`/live/`). If phones cannot connect at
+   all, look at client isolation on the guest network and the guest → `10.1.1.4`
+   firewall rule before anything else.

docs/examples/waters-church-na/boba-fett-translate-proxy.sh

@@ -0,0 +1,64 @@
+#!/bin/bash
+# translate.watersmedia.org on Boba-Fett (Synology DSM 7.0.1).
+#
+# 1. Creates the DSM reverse-proxy rule  http://translate.watersmedia.org:80
+#    -> http://10.1.7.39:3100 (Church Translate) with WebSocket headers,
+#    X-Forwarded-Host, and a 3600 s read timeout, through DSM's own API so it
+#    shows up in Control Panel -> Login Portal -> Advanced -> Reverse Proxy.
+# 2. Adds an nginx server block that answers https://translate.watersmedia.org
+#    with a 301 to the http:// address (the name is LAN-only and has no
+#    certificate, so browsers warn before the redirect; that is expected).
+# 3. Tests the nginx config, reloads it, and prints a local check.
+#
+# Idempotent: re-running skips the rule if it exists and rewrites the redirect.
+# Run on Boba-Fett as root:   sudo bash ~/translate-proxy.sh
+set -euo pipefail
+
+NAME=translate.watersmedia.org
+BACKEND_IP=10.1.7.39
+BACKEND_PORT=3100
+RP_JSON=/usr/syno/etc/www/ReverseProxy.json
+REDIRECT_CONF=/usr/local/etc/nginx/sites-enabled/translate-redirect.conf
+
+if [ "$(id -u)" != 0 ]; then
+  echo "Run with sudo: sudo bash $0" >&2
+  exit 1
+fi
+
+echo "== 1. DSM reverse proxy rule for $NAME"
+if grep -q "\"fqdn\" : \"$NAME\"" "$RP_JSON"; then
+  echo "   rule already present in $RP_JSON, skipping create"
+else
+  # $http_upgrade etc. are nginx variables and must reach DSM literally.
+  ENTRY='{"description":"translate.watersmedia.org","frontend":{"acl":null,"fqdn":"translate.watersmedia.org","https":{"hsts":false},"port":80,"protocol":0},"backend":{"fqdn":"10.1.7.39","port":3100,"protocol":0},"customize_headers":[{"name":"Upgrade","value":"$http_upgrade"},{"name":"Connection","value":"$connection_upgrade"},{"name":"X-Forwarded-Host","value":"$http_host"}],"proxy_connect_timeout":60,"proxy_read_timeout":3600,"proxy_send_timeout":60,"proxy_http_version":1,"proxy_intercept_errors":false}'
+  OUT=$(/usr/syno/bin/synowebapi --exec api=SYNO.Core.AppPortal.ReverseProxy method=create version=1 entry="$ENTRY" 2>&1 || true)
+  echo "   $OUT"
+  if ! echo "$OUT" | grep -q '"success" *: *true'; then
+    echo "   synowebapi did not report success; stopping before the redirect." >&2
+    exit 1
+  fi
+fi
+
+echo "== 2. HTTPS -> HTTP redirect block"
+cat > "$REDIRECT_CONF" <<'EOF'
+# translate.watersmedia.org is served over plain HTTP on the LAN (no certificate).
+# Anyone who types https:// is sent to the http:// address. Added 2026-10-15.
+server {
+    listen 443 ssl;
+    server_name translate.watersmedia.org;
+    return 301 http://translate.watersmedia.org$request_uri;
+}
+EOF
+echo "   wrote $REDIRECT_CONF"
+
+echo "== 3. nginx test + reload"
+/usr/bin/nginx -t
+/usr/syno/bin/synosystemctl reload nginx 2>/dev/null || /usr/bin/nginx -s reload
+echo "   reloaded"
+
+echo "== 4. Local checks from Boba-Fett"
+echo -n "   http  /healthz : "
+curl -s -m 5 --resolve "$NAME:80:127.0.0.1" "http://$NAME/healthz"; echo
+echo -n "   https /        : "
+curl -sk -m 5 -o /dev/null -w '%{http_code} -> %{redirect_url}\n' --resolve "$NAME:443:127.0.0.1" "https://$NAME/"
+echo "done"

docs/examples/waters-church-na/unifi-dns-record.py

@@ -0,0 +1,211 @@
+#!/usr/bin/env python3
+"""Create or update a local DNS A record on every Waters Church UniFi console.
+
+Usage:
+    docs/examples/waters-church-na/unifi-dns-record.py repo.watersmedia.org 10.3.8.90
+    docs/examples/waters-church-na/unifi-dns-record.py repo.watersmedia.org 10.3.8.90 --sites apollo-beach,norwood
+    docs/examples/waters-church-na/unifi-dns-record.py repo.watersmedia.org 10.3.8.90 --dry-run
+    docs/examples/waters-church-na/unifi-dns-record.py --list                # show every DNS policy per site
+
+Each console needs its own Network API key (Site Manager keys from api.ui.com are
+rejected locally). Create one per console in the UniFi UI:
+    Settings -> Control Plane -> Integrations -> Create API Key
+and save it, one line, mode 600, as:
+    ~/.config/unifi/<site>-network-api-key
+where <site> is one of the names in SITES below.
+
+The script talks to the console's Network Integration API
+(/proxy/network/integration/v1/sites/{siteId}/dns/policies) over the LAN /
+site-to-site links, so it must run from inside the church network. Gateways use
+self-signed certificates, so certificate verification is disabled for them.
+Keys are read from disk and sent only in the X-API-KEY header; they are never
+printed.
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+import os
+import shutil
+import ssl
+import subprocess
+import sys
+import urllib.error
+import urllib.parse
+import urllib.request
+
+# Console name -> gateway LAN address (UDM Pro at each site, 2026-10).
+SITES = {
+    "apollo-beach": "10.3.0.1",
+    "north-attleboro": "10.1.0.1",
+    "woonsocket": "10.2.0.1",
+    "norwood": "10.4.0.1",
+    "southcoast": "10.5.0.1",
+}
+
+KEY_DIR = os.path.expanduser("~/.config/unifi")
+TIMEOUT = 15
+
+
+class ApiError(RuntimeError):
+    pass
+
+
+class Console:
+    def __init__(self, name: str, gateway: str):
+        self.name = name
+        self.gateway = gateway
+        self.base = f"https://{gateway}/proxy/network/integration/v1"
+        self.key_path = os.path.join(KEY_DIR, f"{name}-network-api-key")
+        self.key = self._load_key()
+        self.ctx = ssl.create_default_context()
+        self.ctx.check_hostname = False
+        self.ctx.verify_mode = ssl.CERT_NONE
+
+    def _load_key(self) -> str | None:
+        try:
+            with open(self.key_path) as fh:
+                key = fh.read().strip()
+        except FileNotFoundError:
+            return None
+        return key or None
+
+    def request(self, method: str, path: str, body: dict | None = None, query: dict | None = None):
+        url = self.base + path
+        if query:
+            url += "?" + urllib.parse.urlencode(query)
+        data = json.dumps(body).encode() if body is not None else None
+        req = urllib.request.Request(url, data=data, method=method)
+        req.add_header("X-API-KEY", self.key or "")
+        req.add_header("Accept", "application/json")
+        if data is not None:
+            req.add_header("Content-Type", "application/json")
+        try:
+            with urllib.request.urlopen(req, timeout=TIMEOUT, context=self.ctx) as resp:
+                raw = resp.read()
+                return json.loads(raw) if raw else None
+        except urllib.error.HTTPError as e:
+            detail = e.read().decode(errors="replace")[:300]
+            raise ApiError(f"{method} {path} -> HTTP {e.code}: {detail}") from None
+        except (urllib.error.URLError, TimeoutError, OSError) as e:
+            raise ApiError(f"{method} {path} -> {e}") from None
+
+    def site_id(self) -> str:
+        sites = self.request("GET", "/sites").get("data", [])
+        if not sites:
+            raise ApiError("console reports no sites")
+        for s in sites:
+            if s.get("internalReference") == "default" or s.get("name") == "default":
+                return s["id"]
+        return sites[0]["id"]
+
+    def dns_policies(self, site_id: str) -> list[dict]:
+        out: list[dict] = []
+        offset, limit = 0, 100
+        while True:
+            page = self.request("GET", f"/sites/{site_id}/dns/policies", query={"offset": offset, "limit": limit})
+            data = page.get("data", [])
+            out.extend(data)
+            total = page.get("totalCount")
+            offset += len(data)
+            if not data or (total is not None and offset >= total) or len(data) < limit:
+                return out
+
+    def ensure_a_record(self, site_id: str, fqdn: str, ipv4: str, ttl: int | None, dry_run: bool) -> str:
+        existing = [p for p in self.dns_policies(site_id) if p.get("domain", "").lower() == fqdn.lower()]
+        a_records = [p for p in existing if p.get("type") == "A_RECORD"]
+        other = [p for p in existing if p.get("type") != "A_RECORD"]
+        if other:
+            kinds = ", ".join(sorted({p.get("type", "?") for p in other}))
+            return f"SKIPPED: {fqdn} already has a non-A policy here ({kinds}); fix by hand"
+        if len(a_records) > 1:
+            return f"SKIPPED: {len(a_records)} A records already exist for {fqdn}; fix by hand"
+
+        body = {"type": "A_RECORD", "enabled": True, "domain": fqdn, "ipv4Address": ipv4}
+        if ttl:
+            body["ttlSeconds"] = ttl
+
+        if a_records:
+            cur = a_records[0]
+            same = cur.get("ipv4Address") == ipv4 and cur.get("enabled", True) and (ttl is None or cur.get("ttlSeconds") == ttl)
+            if same:
+                return f"unchanged: {fqdn} -> {ipv4} already present (id {cur.get('id')})"
+            if dry_run:
+                return f"would UPDATE {fqdn}: {cur.get('ipv4Address')} -> {ipv4} (id {cur.get('id')})"
+            self.request("PUT", f"/sites/{site_id}/dns/policies/{cur['id']}", body=body)
+            return f"UPDATED {fqdn}: {cur.get('ipv4Address')} -> {ipv4}"
+
+        if dry_run:
+            return f"would CREATE {fqdn} -> {ipv4}"
+        created = self.request("POST", f"/sites/{site_id}/dns/policies", body=body)
+        return f"CREATED {fqdn} -> {ipv4} (id {created.get('id') if isinstance(created, dict) else '?'})"
+
+
+def resolve_via(gateway: str, fqdn: str) -> str:
+    """Ask the gateway's resolver directly; returns the answer or a short status."""
+    dig = shutil.which("dig")
+    if not dig:
+        return "(dig not installed)"
+    try:
+        res = subprocess.run([dig, "+short", "+time=3", "+tries=1", f"@{gateway}", fqdn, "A"],
+                             capture_output=True, text=True, timeout=10)
+    except subprocess.TimeoutExpired:
+        return "(timeout)"
+    answer = res.stdout.strip().replace("\n", " ")
+    return answer or "(no answer)"
+
+
+def main() -> int:
+    ap = argparse.ArgumentParser(description=__doc__, formatter_class=argparse.RawDescriptionHelpFormatter)
+    ap.add_argument("fqdn", nargs="?", help="host name, e.g. repo.watersmedia.org")
+    ap.add_argument("ipv4", nargs="?", help="IPv4 address the name should resolve to")
+    ap.add_argument("--sites", default=",".join(SITES), help="comma-separated subset of: " + ", ".join(SITES))
+    ap.add_argument("--ttl", type=int, default=300, help="TTL in seconds (default 300; the API rejects a null TTL)")
+    ap.add_argument("--dry-run", action="store_true", help="show what would change without writing")
+    ap.add_argument("--list", action="store_true", help="print every DNS policy on each console and exit")
+    ap.add_argument("--no-verify", action="store_true", help="skip the dig check after writing")
+    args = ap.parse_args()
+
+    if not args.list and (not args.fqdn or not args.ipv4):
+        ap.error("fqdn and ipv4 are required unless --list is given")
+
+    names = [s.strip() for s in args.sites.split(",") if s.strip()]
+    unknown = [n for n in names if n not in SITES]
+    if unknown:
+        ap.error(f"unknown site(s): {', '.join(unknown)}")
+
+    failures = 0
+    for name in names:
+        console = Console(name, SITES[name])
+        label = f"{name:16s} {console.gateway:10s}"
+        if not console.key:
+            print(f"{label} NO KEY: save the console's API key to {console.key_path}")
+            failures += 1
+            continue
+        try:
+            site_id = console.site_id()
+            if args.list:
+                policies = console.dns_policies(site_id)
+                print(f"{label} {len(policies)} DNS policies")
+                for p in sorted(policies, key=lambda p: p.get("domain", "")):
+                    target = p.get("ipv4Address") or p.get("ipv6Address") or p.get("targetDomain") or p.get("text") or ""
+                    flag = "" if p.get("enabled", True) else " (disabled)"
+                    print(f"    {p.get('type', '?'):12s} {p.get('domain', ''):40s} -> {target}{flag}")
+                continue
+            result = console.ensure_a_record(site_id, args.fqdn, args.ipv4, args.ttl, args.dry_run)
+            line = f"{label} {result}"
+            if not args.dry_run and not args.no_verify and not result.startswith("SKIPPED"):
+                line += f" | dig @{console.gateway}: {resolve_via(console.gateway, args.fqdn)}"
+            print(line)
+            if result.startswith("SKIPPED"):
+                failures += 1
+        except ApiError as e:
+            print(f"{label} FAILED: {e}")
+            failures += 1
+
+    return 1 if failures else 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())