status-indicators/install.sh

#!/bin/zsh
# Install or update the status panel watchdog on this Mac (the Ingest Mac) as a LaunchAgent.
# Re-run after changing any file in this folder.
#
#   zsh install.sh                 install / update and (re)start
#   zsh install.sh --keep-config   update the code but leave the live config.json as it is
#   zsh install.sh --replace-config   replace the live config even when it came from an Apply on the settings page
#   zsh install.sh --site <id>     first install of a campus: its config from sites/<id>/, else sites/_template/
#   zsh install.sh --rollback      put the previous code back (kept in prev/) and restart
#   zsh install.sh --remove        stop it and remove the LaunchAgent (files stay)
#
# The config is validated with the NEW code before anything is touched, so a stricter check can
# never leave the watchdog crash-looping. The previous code is kept in prev/ for --rollback.
set -e
SRC=${0:A:h}
LABEL=org.waterschurch.status-panel
SETTINGS_LABEL=org.waterschurch.status-settings
# App Support, not ~/Documents: launchd-run python3 cannot read ~/Documents.
DEST="$HOME/Library/Application Support/status-panel"
PLIST="$HOME/Library/LaunchAgents/$LABEL.plist"
DOMAIN="gui/$(id -u)"
CODE=(status_panel.py readiness.py coremidi.py netgear.py schema.py make_page.py push_page.py nav_keys.py atem_watch.js atem_state.js nav_templates.json)
KEEP_CONFIG=0
SITE=""
SITE_NEXT=0
for arg in "$@"; do
  if [[ $SITE_NEXT == 1 ]]; then SITE="$arg"; SITE_NEXT=0; continue; fi
  case "$arg" in
    --keep-config) KEEP_CONFIG=1 ;;
    --replace-config) REPLACE_CONFIG=1 ;;
    --site) SITE_NEXT=1 ;;
    --remove|--rollback|--now) ;;
    *) echo "unknown option $arg" >&2; exit 2 ;;
  esac
done
# The config to install: the campus folder when asked for, else this folder's config.json.
SRC_CONFIG="$SRC/config.json"
if [[ -n "$SITE" ]]; then
  if [[ -f "$SRC/sites/$SITE/config.json" ]]; then SRC_CONFIG="$SRC/sites/$SITE/config.json"
  elif [[ -f "$SRC/sites/_template/config.json" ]]; then SRC_CONFIG="$SRC/sites/_template/config.json"; echo "no sites/$SITE/ in the folder: starting from the template"
  else echo "no sites/ folder here" >&2; exit 2; fi
  [[ -f "$DEST/config.json" ]] && KEEP_CONFIG=1 && echo "a config is already installed: left alone (the page's 'New campus from a bundle' replaces it)"
fi

restart_agent() {   # $1 = label, $2 = plist
  local label=${1:-$LABEL} plist=${2:-$PLIST}
  launchctl bootout "$DOMAIN/$label" 2>/dev/null || true
  # bootout returns before the old job is gone; bootstrapping too early fails with "5: Input/output error".
  for i in {1..50}; do launchctl print "$DOMAIN/$label" >/dev/null 2>&1 || break; sleep 0.2; done
  for attempt in 1 2 3; do
    launchctl bootstrap "$DOMAIN" "$plist" && break
    [[ $attempt == 3 ]] && { echo "launchctl bootstrap failed for $label" >&2; exit 1; }
    sleep 1
  done
}

SETTINGS_PLIST="$HOME/Library/LaunchAgents/$SETTINGS_LABEL.plist"
write_settings_plist() {
  cat > "$SETTINGS_PLIST" <<EOF
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key><string>$SETTINGS_LABEL</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/bin/python3</string>
    <string>-m</string>
    <string>settings.server</string>
    <string>--data-dir</string>
    <string>$DEST</string>
  </array>
  <key>WorkingDirectory</key><string>$DEST</string>
  <key>RunAtLoad</key><true/>
  <key>KeepAlive</key><true/>
  <key>ThrottleInterval</key><integer>10</integer>
  <key>AbandonProcessGroup</key><true/>
  <key>StandardErrorPath</key><string>$HOME/Library/Logs/status-settings.err.log</string>
</dict>
</plist>
EOF
}

write_plist() {   # $1 = exit timeout in seconds
  cat > "$PLIST" <<EOF
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key><string>$LABEL</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/bin/python3</string>
    <string>$DEST/status_panel.py</string>
    <string>--data-dir</string>
    <string>$DEST</string>
  </array>
  <key>RunAtLoad</key><true/>
  <key>KeepAlive</key><true/>
  <key>ThrottleInterval</key><integer>10</integer>
  <key>ExitTimeOut</key><integer>$1</integer>
  <key>StandardErrorPath</key><string>$HOME/Library/Logs/status-panel.err.log</string>
</dict>
</plist>
EOF
}

wait_for_start() {   # $1 = install time (unix): wait for a start stamp newer than that
  for i in {1..60}; do
    if [[ -f "$DEST/started.json" ]] && /usr/bin/python3 - "$DEST/started.json" "$1" <<'PY' 2>/dev/null
import json, sys
d = json.load(open(sys.argv[1]))
sys.exit(0 if d.get("started_at", 0) >= float(sys.argv[2]) else 1)
PY
    then
      echo "running (code $(/usr/bin/python3 -c 'import json,sys; print(json.load(open(sys.argv[1])).get("version"))' "$DEST/started.json"))"
      return 0
    fi
    sleep 0.5
  done
  echo "WARNING: no start stamp after 30 s - check ~/Library/Logs/status-panel.log and status-panel.err.log" >&2
  return 1
}

if [[ "$1" == "--remove" ]]; then
  launchctl bootout "$DOMAIN/$LABEL" 2>/dev/null || true
  launchctl bootout "$DOMAIN/$SETTINGS_LABEL" 2>/dev/null || true
  rm -f "$PLIST" "$SETTINGS_PLIST"
  echo "removed $LABEL and $SETTINGS_LABEL (files left in $DEST)"
  exit 0
fi

if [[ "$1" == "--rollback" ]]; then
  [[ -d "$DEST/prev" ]] || { echo "nothing to roll back to ($DEST/prev is missing)" >&2; exit 1; }
  for f in "$DEST"/prev/*(N); do cp "$f" "$DEST/"; done
  /usr/bin/python3 "$DEST/status_panel.py" --check --config "$DEST/config.json"
  T=$(date +%s)
  write_plist "$(/usr/bin/python3 "$DEST/status_panel.py" --exit-timeout --config "$DEST/config.json")"
  restart_agent
  echo "rolled back to the previous code (version $(/usr/bin/python3 -c 'import sys; sys.path.insert(0, sys.argv[1]); import status_panel; print(status_panel.VERSION)' "$DEST"))"
  wait_for_start "$T" || true
  exit 0
fi

# 0. Not while a HyperDeck is recording (the watchdog restarts for a few seconds); --now overrides.
if [[ -f "$DEST/live-now.json" && " $* " != *" --now "* ]] && /usr/bin/python3 - "$DEST/live-now.json" <<'PY'
import json, sys, time
d = json.load(open(sys.argv[1]))
sys.exit(0 if d.get("live") and time.time() - d.get("time", 0) < 60 else 1)
PY
then
  echo "a HyperDeck is recording right now ($(/usr/bin/python3 -c 'import json,sys; print(json.load(open(sys.argv[1])).get("reason"))' "$DEST/live-now.json")) - not installing; use --now to override" >&2
  exit 3
fi

# 0b. Never undo an Apply. Live settings that came from the settings page (their fingerprint is the
# "sha_after" of an entry in history/) and differ from the config this would install were changed on
# the page since this folder was made: replacing them would quietly undo that (2026-10-15: READY hours
# set on the page went back to the folder's defaults). Copy them into the folder first, or say so.
if [[ $KEEP_CONFIG == 0 && ${REPLACE_CONFIG:-0} == 0 && -f "$DEST/config.json" && -d "$DEST/history" ]] \
   && ! cmp -s "${SRC_CONFIG:-$SRC/config.json}" "$DEST/config.json" \
   && /usr/bin/python3 -c '
import glob, hashlib, json, os, sys
d = sys.argv[1]
live = hashlib.sha256(open(os.path.join(d, "config.json"), "rb").read()).hexdigest()
for m in glob.glob(os.path.join(d, "history", "*.meta.json")):
    try:
        meta = json.load(open(m))
    except ValueError:
        continue
    if meta.get("sha_after") == live:
        print("the live settings come from the settings page (%s, %s): not replacing them." % (meta.get("by", "?"), os.path.basename(m)[:15]))
        sys.exit(0)
sys.exit(1)' "$DEST"
then
  echo "Copy them into this folder first (scp checklist-ingest:'Library/Application Support/status-panel/config.json' config.json)," >&2
  echo "or run with --keep-config (code only) or --replace-config (overwrite them)." >&2
  exit 4
fi

# 1. The config that will run, checked with the code that will run it.
mkdir -p "$DEST"
if [[ $KEEP_CONFIG == 1 && -f "$DEST/config.json" ]]; then
  CFG="$DEST/config.json"
else
  CFG="$SRC_CONFIG"
fi
/usr/bin/python3 "$SRC/status_panel.py" --check --config "$CFG"
EXIT_TIMEOUT=$(/usr/bin/python3 "$SRC/status_panel.py" --exit-timeout --config "$CFG")

# 2. Keep the code that runs now, for --rollback.
mkdir -p "$DEST/prev"
for f in $CODE; do [[ -f "$DEST/$f" ]] && cp "$DEST/$f" "$DEST/prev/"; done

# 3. Files. The live config is backed up when it changes; --keep-config leaves it alone.
if [[ $KEEP_CONFIG == 0 ]]; then
  if [[ -f "$DEST/config.json" ]] && ! cmp -s "$SRC_CONFIG" "$DEST/config.json"; then
    cp "$DEST/config.json" "$DEST/config.json.bak-$(date +%Y%m%d-%H%M%S)"
    echo "config.json replaced (the old one is kept as config.json.bak-...; use --keep-config to leave it)"
  fi
  cp "$SRC_CONFIG" "$DEST/config.json"
fi
for f in $CODE; do [[ -f "$SRC/$f" ]] && cp "$SRC/$f" "$DEST/"; done
[[ -f "$SRC/atem-reference.xml" ]] && cp "$SRC/atem-reference.xml" "$DEST/"
# The set-up script templates the page fills in for each computer.
[[ -d "$SRC/remote-access" ]] && rm -rf "$DEST/remote-access" && cp -R "$SRC/remote-access" "$DEST/"
# The settings page (its own LaunchAgent) and the record of coloured page-number keys (site-owned: never overwritten).
if [[ -d "$SRC/settings" ]]; then
  rm -rf "$DEST/settings" && cp -R "$SRC/settings" "$DEST/" && find "$DEST/settings" -name "__pycache__" -prune -exec rm -rf {} + 2>/dev/null
fi
[[ -f "$SRC/nav_locations.json" && ! -f "$DEST/nav_locations.json" ]] && cp "$SRC/nav_locations.json" "$DEST/"
if [[ -d "$SRC/companion-objects" ]]; then
  rm -rf "$DEST/companion-objects" && cp -R "$SRC/companion-objects" "$DEST/"
fi

# 4. The LaunchAgent, with the exit timeout this config needs (a running fix finishes before a restart).
T=$(date +%s)
write_plist "$EXIT_TIMEOUT"
restart_agent
echo "installed $LABEL -> $DEST (exit timeout ${EXIT_TIMEOUT}s)"
echo "log: ~/Library/Logs/status-panel.log"
wait_for_start "$T" || true
if [[ -d "$DEST/settings" ]]; then
  write_settings_plist
  restart_agent "$SETTINGS_LABEL" "$SETTINGS_PLIST"
  PORT=$(/usr/bin/python3 -c 'import json,sys; print(json.load(open(sys.argv[1])).get("site",{}).get("settings_port",8020))' "$DEST/config.json")
  echo "settings page: http://$(hostname -s).local:$PORT/  (log: ~/Library/Logs/status-settings.log)"
fi