Waters-Church/companion-module-digico-s31
4
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Write on/off switches as float 0/1, as the S31 requires

Browse Source 
Verified on a live S31 against an unused, silent input (restored after):
a float fader write is accepted and echoed, but a mute written as int 0/1
or as an OSC True/False is silently ignored, while a float 1.0/0.0 works.
DiGiCo's 2014 SD command list says int, which is wrong for the S31.

Every switch (mute, solo, send on, group assign, EQ/dynamics/filter/
insert/delay switches, phantom, phase, pad, GEQ in) now goes out as a
float. The mock console now ignores int and T/F switch writes the same
way the console does, so a regression to int fails 38 checks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
michael
2026-10-15 17:32:17 -04:00
co-authored by Claude Opus 5.5
parent dad8010239
commit 57645be1e9
6 changed files with 87 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files
tools/README.md
+5 -2
View File
@@ -70,7 +70,7 @@ inputs, `--auxes N` the busses (default 25), and the matrix (8 outputs, 10 input
| `/Console/{Aux_Outputs,Group_Outputs}/modes/?`, `/Console/Input_Channels/modes/?` | one `i` per buss / input (2 = stereo, 1 = mono, captured) |
| `/Input_Channels/N/Channel_Input/name/?`, `/Aux_Outputs/N/Buss_Trim/name/?`, `/Group_Outputs/N/Buss_Trim/name/?`, `/Matrix_Outputs/N/Buss_Trim/name/?`, `/Control_Groups/N/name/?`, `/Graphic_EQ/N/name/?` | `s`. Only input names accept a write here (not verified on the real console); the others are read-only. The 25 busses appear under both Aux_Outputs and Group_Outputs; a buss reports its name on the side matching its mode and `""` on the other. Matrix inputs have no name address |
| `/{Input_Channels,Aux_Outputs,Group_Outputs,Matrix_Outputs,Control_Groups}/N/fader/?` | `f`, dB, -150 = -inf, max +10 |
| `/{...}/N/mute/?`, `/{...}/N/solo/?` | `f` 0/1 (a float, not an int) |
| `/{...}/N/mute/?`, `/{...}/N/solo/?` | `f` 0/1 (a float, not an int); a SET must be a float too, see below |
| `/Input_Channels/N/Panner/pan/?` | `f`, 0..1, 0.5 = centre |
| `/Input_Channels/N/Aux_Send/M/{send_level,send_on,send_pan}/?` | `f` (level dB -150..10, on 0/1, pan 0..1) |
| `/Input_Channels/N/Aux_Send/M/send_pre-post/?` | `i` (captured as an int, default 0; settable 0..1, which value means "pre" is an assumption; the Companion module does not use it) |
@@ -90,7 +90,10 @@ chooses `id`. Every subscribed id then gets a random value 0..127 about five tim
`/Meters/values ,ii... [id, v, id, v, ...]` (only ids whose value changed). `/Meters/clear` drops every
subscription, like the real console.
Sets accept int or float for the 0/1 switches (any non-zero = on) and clamp levels, pans and values to
A 0/1 switch (mute, solo, send on, group assign, matrix send on, `geq_in` and every channel-strip switch) is both
reported **and written as a float** 0.0 / 1.0, verified on a real S31 on 2026-10-15 (the 2014 DiGiCo list says
int). Exactly like the console, the mock accepts only a float write (stored, echoed as `,f`) and silently
ignores an int `i` or `T`/`F` write: no echo, no state change. Levels, pans and values are clamped to
their ranges. Like the real console the mock stays **silent** on everything else: all lowercase S-Series
addresses, `/Console/Resend`, `/Console/Channels/?`, whole-send queries, out-of-range entity numbers,
sets of read-only names. (`--bool-int` has no effect in `sd`.)